RS2 "stroker" projekt... 700hp

[smiler]

For an RS2 they are the wrong hat height you want 965.351.045/046 discs

Just seen you've given up on the 330mm discs

Yep cant find a oem disc with the right hatheight for the 6-pot.
Must go custom there

Just ordered a new pair of 996 rear calipers and a Brunobracket

[pixsaudisex2]

Nice

[lind4hl]

I think you have forgotten something here..

[smiler]

Need the lift so i can work on my work car... so i had to put some wheels on it

Caddy TDI-R with KW-coilovers and 19inch wheels





Now the RS
A bit low on the lowest



Thats better...





And a few bonus pics...

[PaulJ]

The 993RS 1 piece disks will fit with 6 pot calipers under standard 17" wheels with approx 3mm to spare all round

have them on my rs2, made the brackets with 40 x 40 ally bar

Which calipers are you going to use on the rears 421/422's

paul J

[smiler]

The 993RS 1 piece disks will fit with 6 pot calipers under standard 17" wheels with approx 3mm to spare all round

have them on my rs2, made the brackets with 40 x 40 ally bar

Which calipers are you going to use on the rears 421/422's

paul J

Ok then the 993RS disc is 322x32mm???
PartNumber 993 351 045/46 00?

The 6-pot wants 330 - 360mm disc but if you say it works then thats nice
The pads will be bigger then the disc?

Dont know if im keeping my 18" cups or not, if then it would be intresting


The rears are 996 421/422 yes!



Where do i buy the 993RS rotors?
€200+ each in Sweden...

[PaulJ]

993 RS disks Part numbers

993 351 045 & 993 351 046, These disks are 1 piece Hat height of 40mm

Audi OEM upgrade disks, Believe these first used with the 964 3.6l turbo

965 351 045 & 965 351 046 These disks are 2 piece not floating though
and have hat height of 45mm,

Both disks are 322 x 32, I can't see any reason why the 6 pots cannot be used
with either of these disks. With the RS disks the caliper is closer to the outside
of the rim by 5mm but it still fits under a standard wheel so if in doubt use the
OEM 2 piece disks, cheaper getting them from porsche than audi though.
Brackets are no problem there is plenty of room also there is no problem with
pad width as disk surface is about the same as the 350mm GT3 disk at 60mm

Hope this helps, Cheers Paul

[smiler]

993 RS disks Part numbers

993 351 045 & 993 351 046, These disks are 1 piece Hat height of 40mm

Audi OEM upgrade disks, Believe these first used with the 964 3.6l turbo

965 351 045 & 965 351 046 These disks are 2 piece not floating though
and have hat height of 45mm,

Both disks are 322 x 32, I can't see any reason why the 6 pots cannot be used
with either of these disks. With the RS disks the caliper is closer to the outside
of the rim by 5mm but it still fits under a standard wheel so if in doubt use the
OEM 2 piece disks, cheaper getting them from porsche than audi though.
Brackets are no problem there is plenty of room also there is no problem with
pad width as disk surface is about the same as the 350mm GT3 disk at 60mm


Hope this helps, Cheers Paul

Thanks!!



Is this the 2 piece you mean? Its from a 993 Turbo though...
965 is a onepiece disc.



With the 6-pot on the pic... had these discs with the bigreds...





When i look at Utzon i found 3 different 322 discs

965 351 045 00 onepiece €210
993 351 045 10 Turbo twopiece €230
993 351 045 00 RS onepiece €300



FVD:
GT2 993 351 045 70 €275

Pic: 993 351 045 10AM Turbo €175

[smiler]

Found this disc...

965 351 041 01
brake disc front left 968 with M030/CS/Audi RS2 330x32mm
968CS (93-95)


Looks high enough... €254

[PaulJ]

Hi

So many disks to choose from

Thats the 2 piece disk I was referring to, Yes they used them on the 993 TT as well


Quote

With the 6-pot on the pic... had these discs with the bigreds...
Clean these disks up are reuse them, will at lease allow you to make the brackets

Quote
When i look at Utzon i found 3 different 322 discs

965 351 045 00 onepiece €210
993 351 045 10 Turbo twopiece €230
993 351 045 00 RS onepiece €300

The 965 disks are 2 piece, I was reading the numbers off the disks I have
which were supplied with VAG partnumbers as well

That looks quite pricey for the RS disks. I got mine from Tech9 motorsport
in liverpool

Cheers Paul

[smiler]

Hi

So many disks to choose from

Thats the 2 piece disk I was referring to, Yes they used them on the 993 TT as well


Quote

With the 6-pot on the pic... had these discs with the bigreds...
Clean these disks up are reuse them, will at lease allow you to make the brackets

Quote
When i look at Utzon i found 3 different 322 discs

965 351 045 00 onepiece €210
993 351 045 10 Turbo twopiece €230
993 351 045 00 RS onepiece €300

The 965 disks are 2 piece, I was reading the numbers off the disks I have
which were supplied with VAG partnumbers as well

That looks quite pricey for the RS disks. I got mine from Tech9 motorsport
in liverpool

Cheers Paul

Yea i'm gooing mental haha...

My disc on the pic are to worn... falling apart


Strange about the numbers... FVD has almost pics of al the discs.
The 965 322 is onepiece on every place ive looked.

40mm from the hat is to little for me with my 18" cup reps.


Must go with the 993 351 045 10 as its the only one with 45mm from the hat?




The last pic of the 965 disc is wrong... its the 304x32
FVD has wrong info.

[Jamo]

The 965 discs are 45mm hat not 40mm hat, the 993 are 40mm hat.

http://www.porsche968uk.co.uk/techni...968-brakes.htm

this is why the 965 discs are direct replacements for the RS2 OEM 322 discs

When :corey: used to use the 993 disc he replaced the stock hat with a custom one to make it 45mm

[smiler]

This is my 2-piece disc... 45mm from hat to disc.

[Jamo]

What disc is that? it must be from a different porsche

[smiler]

What disc is that? it must be from a different porsche

Now you know why im confused



Do MTM make discs? Could be MTM then... DBR made some mods on it -00.


Well to me it looks exacly like this...?

bake disc 993 Turbo 95-98 left 322mmx32mm 993 351 045 10