Terrybullwon's Racing S2 coupe

[terrybullwon]

Pretty much ready for set up.

[Albert]

I want to order them too. It would be helpful for me to know the length that fits

[terrybullwon]

What length are the Sellholm blades on the rear ?

I think 280mm i will have to check

[Albert]

What length are the Sellholm blades on the rear ?

[Mcstiff]

Don't buy Ast!

Your have to sort them and Dyno them your self. Buy Ohlins.

Thanks for the heads up! Too bad, they looked fairly reasonable (based on what's available on their site).

[terrybullwon]

with pump do you use for diff cooling? nissan 200sx?

tilton

[quattro-nick]

with pump do you use for diff cooling? nissan 200sx?

[terrybullwon]

Seriously envious of the struts! Exactly what I need on my 90.

Don't buy Ast!

Your have to sort them and Dyno them your self. Buy Ohlins.

A shameless plug for Jay @DMD had to drop this out with the dampers. 6 bolts and its straight to the floor. Off to be powder coated white and the diff pre load re shimmed as its worked its way loose.

[Mcstiff]

Seriously envious of the struts! Exactly what I need on my 90.

[AndyP]

Told you

[terrybullwon]

Yep.... It's amazing.

[AndyP]

Have you tried it yet?

[terrybullwon]

So dampers were sorted on the front and rear again.

Had to remove the dead stroke and machine my own cylinder tops with a O ring to get them to work with the new lower COG of the front

They are now rocking Ohlins internals.

Springs have been changed i have gone up front and rear.











Note. Eibach springs



For Andy

[terrybullwon]

I've ordered one. Lets see how i get on with that. Really need a water cooler as well, But i dont do enough AC work to really warrant it.

[AndyP]

I havn't got that one yet, they do a 150amp version, which for some reason is only about £60. I bought that one just to see if it was any good, now I know how good they are I'll get the full 200amp one