Terrybullwon's Racing S2 coupe

[david1980]

this one?

[IMG]http://i81.photobucket.com/albums/j223/terrybullwon/FE09E2B3-27B9-414B-9259-0A8****43D00_zpsexghtegg.jpg[/IMG]

think the swear filters picking up something?

[terrybullwon]

[IMG]http://i81.photobucket.com/albums/j223/terrybullwon/FE09E2B3-27B9-414B-9259-0A8****43D00_zpsexghtegg.jpg[/IMG]

[terrybullwon]

[IMG]http://i81.photobucket.com/albums/j223/terrybullwon/FE09E2B3-27B9-414B-9259-0A8****43D00_zpseq4loogu.jpg[/IMG]

[terrybullwon]

James, I should remember but I dont..... Whats space like in your boot? For the WRC cars ARB goes over boot floor with bearings and weld in housings in rear arches... Raises some weight but the effect on CoG is minimal. clears space under car too. Can look at simple housings and a cross bar.

I think thats the plan chief. I'll get some bearings to suit the bar and you can come up with some fancy bracket that will cost me a arm and a leg.

On a plus note, I can finally use the car again as my parts have arived back from Zircotech only 22 days late mind you and costing me a evening track day at £150 and lucky enough i sold my space at Snett.

Got to be honest if i knew it was going to take so long i would have not bothered but i thought i had the time as i had alittle fabrication work to do. And my Dash was away being repaired.

Here is the end results

[Puglife]

James, I should remember but I dont..... Whats space like in your boot? For the WRC cars ARB goes over boot floor with bearings and weld in housings in rear arches... Raises some weight but the effect on CoG is minimal. clears space under car too. Can look at simple housings and a cross bar.

[terrybullwon]

Yeah so it will end up kind of like a ngtc set up

[my2000apb]

so are you going to be using the sway bar "drop links" going upwards instead?

[terrybullwon]

Thanks dude. It's defently all about cutting it up!

[my2000apb]

chef, I love the suspension work youre doing here, keep up the great work

and cutting stuff up to make perfect is what im all about

[terrybullwon]

It's a lot lighter than stock I'll weigh it after I finally get it tested.

I wanted to get the ARB arms out of the wind but they clash with the camber axis. I am going to mount it in the car and cut the **** out of the rear

[Puglife]

chef, how far upwards/inwards are the c-arm/subframe pickups? are the c-arms longer than stock?

Pick up points are as OE but James' version there has a variation of +-20mm Y Axis on the pickups. Will get final fabricated weights and then muster the costs (Wont be to everyones budgets but then again I will have to outlay nearly £9k to get them produced as a small batch....

Current development time - 26hours... Chef where do you want the bill sending

[Puglife]

He did well for a Northerner

Piss off you glorified food warmer!

[terrybullwon]

Yeah the wish bones are a different shape to the OEM items and wish bone pick ups are same as stock.

[my2000apb]

chef, how far upwards/inwards are the c-arm/subframe pickups? are the c-arms longer than stock?

[Jamo]

Everyone in England is a northerner to you!