Terrybullwon's Racing S2 coupe

[terrybullwon]

don't see too many racing s2's out there on the highway do ya ?

Trailer queen and all that

Hi,

Just read through this for the first time. Very inspirational and stunning build quality!

Love it

Jason.

Thanks Jason.


Right for Andy P

Basicly i had a few issues with my exhaust touching the propshaft under running. Not surprising really with how hard the dampers are.

So i changed over like Hamish to oval stainless its ****ing expensive but its worth it. I made all the transitions, and i recycled the bends from my old exhaust to keep the costs down.

Made using my R tech welder, oval is 101mm and front flexi is 101mm round.

I still kept 4 boxes as with two i was over 108db its not connected to the side exits in these pictures

So i changed to this.

[Jaswan]

Hi,

Just read through this for the first time. Very inspirational and stunning build quality!

Love it

Jason.

[my2000apb]

Just passed you in the opposite direction on the m26 with this on the back off a trailer
Gav

don't see too many racing s2's out there on the highway do ya ?

[terrybullwon]

Just passed you in the opposite direction on the m26 with this on the back off a trailer
Gav

[gavs20v]

Just passed you in the opposite direction on the m26 with this on the back off a trailer
Gav

[Bram]

spotted Jyrki working his magic. great!

[europeanme]

Carbon one is the one on my bench in the above photo, it's got a tube in side, either titanium or something posh. The weight saving is great I'll stick with it!

so it wore through the carbon outer!!....

[terrybullwon]

How was it moving off true James? I had my prop rubbing on the floor once but only because the diff was lifting under power due to a diff side mount failing.

The balancing weight came off and launched its self out from the Dyno tying to kill Repo. Found a company to balance it will have it back done next week.

did you not use the carbon prop?.....

to be honest if you were planning on using it better a metal one took the hit than a posh plastic one!!....

Carbon one is the one on my bench in the above photo, it's got a tube in side, either titanium or something posh. The weight saving is great I'll stick with it!

[europeanme]

Yes alot! I Made a mistake of removing every grommet!

Prop-shaft is carbon fiber

did you not use the carbon prop?.....

to be honest if you were planning on using it better a metal one took the hit than a posh plastic one!!....

[G60Rallye]

How was it moving off true James? I had my prop rubbing on the floor once but only because the diff was lifting under power due to a diff side mount failing.

[terrybullwon]

It will be okay after it's rebalanced on Monday, it was moving about 20mm off true

[AndyP]

What was it rubbing on? Something that's easy to move I hope?

[terrybullwon]

Yes I have a lovely stainless bench in my workshop

[AndyP]

have you got kitchen prep tables in your workshop?

Or is the prop in the kitchen!!

[Error404]

have you got kitchen prep tables in your workshop?