B3 Audi 80 16V Sport (1.8 Turbo) - loads of pics

[chiefmechanic]

kamei

I have an audi 90 with the same bumper as you have fitted. I also have the rear bumper cover. the side skirts were thrown out by a numpty during my garage refurbishment. You can have the rear bumper cover if you want it. It will cost you the postage. I am scrapping my 90 so if there is any other parts you want then let me know. Great looking car you have made.
Brian

[1781cc]

Brian, that would be perfect, very generous, ill drop you a list of stuff tomorrow, need a few bits and will sort you out mate, no worries there!

[sam80quattro]

ooo how much for the front bumper?

[ross b]

Read this thread start to finish, good to see it coming together. I really like it on its original wheels Im interested in doing this rear bench swap into my avant, obv no firewall with mine though. will that be an issue? cheers ross

[1781cc]

Bolted the RS4 Alloys onto the B3 today, looks good, very tight on clearance with the suspension arm, so may look at 5mm spacers! Tyres are 225/45/17 Vredesden Ultrac Sessantas







When Martin has sorted the idle issue it'll be back at Bahnstorm for BAM injectors & FPR, Bosch 044 and the following: T28 and cast iron manifold which rather helpfully is built for the 20v but also pre moulded for the T25/T28 fitment (making life easier)

[andy10v]

Looking good, and some more goodies to come.

Any reason you went for 225/45/17?

[1781cc]

Looking good, and some more goodies to come.

Any reason you went for 225/45/17?

Its front wheel drive, not quattro, so I wanted to get as much contact patch on the tarmac as possible. I know the speedo will be out slightly, but I will factor that in once I get it back and rolling with a GPS system so I know how much to mentally adjust it by.

I had 225/40/18's on my B6 S4 back in the day and I always thought the size worked well - I love Vreds

[ChrisAudi80]

Looks good. That turbo set up should be very good. get ready for wheelspin. hehe

[quattrostyle]

Very nice, only needs a rear sport edition/Kamei bumper to finish it off.

[1781cc]

Very nice, only needs a rear sport edition/Kamei bumper to finish it off.

Always on the lookout for one... certainly not easy to find!

[Słonik]

I have a rear sport edition/Kamei bumper .

[Sleeper_Avant]

loving the front bumper Lee i must say!

wheels look bang on too

[1781cc]

Some people are divided on the wheels... I like them personally, makes the car look lower as well.

I get this back tomorrow so expect updates to come thick and fast after 3 months of having is out of my possession in a garage :-(

[sam80quattro]

lee your aeb fpr is 4 bar whereas the bam motors run 3, so you might want to keep that in there, pretty sure the bam injectors are also a different height to aeb injectors so not a straight fit.. c20let injectors fit straight in though and are capable of 300hp

[1781cc]

lee your aeb fpr is 4 bar whereas the bam motors run 3, so you might want to keep that in there, pretty sure the bam injectors are also a different height to aeb injectors so not a straight fit.. c20let injectors fit straight in though and are capable of 300hp

Hi mate, what cc are your injectors out of curiosity?