Stroker S2

[Pat D]

Sydney mate, how about you?

[jsol]

Bellingen, near Coffs Harbour on the mid north coast.

[sailaz]

This item was bought from 034 Motorsport some yrs ago. Pretty sure they should still have it available.

...... I don't see it ... https://store.034motorsport.com/cata...e+body+adapter

[momento1]

Sydney mate, how about you?

plus 1 here for Sydney.

Where abouts Pat?
im Western Sydney near Wetherill Park

[Pat D]

...... I don't see it ... https://store.034motorsport.com/cata...e+body+adapter

Might be deleted, I did purchase it a very long time ago.

[Pat D]

plus 1 here for Sydney.

Where abouts Pat?
im Western Sydney near Wetherill Park

I'm up the mountains a little, my work is near you though.

[Pat D]

All going as planned, shed should be up second week in March

filedata/fetch?id=2015283&d=1518039499&type=thumb

[jsol]

Feels good when you get that slab down.

[PRY4SNO]

I find it interesting that we both have rather similar builds, and both were postponed by similar changes of priorities in life. In the next few years I'm looking at building a 20'x40' shop (at least) on our new farm. Limiting factor -- so far as I can tell right now -- will be the trusses and the concrete pad.

Will be following your build even closer now!

[momento1]

All going as planned, shed should be up second week in March

filedata/fetch?id=2015283&d=1518039499&type=thumb

Nice shed slab.

Im part owner in a family company in concrete construction and development.
I could have helped you with your slab....

[Pat D]

Nice shed slab.

Im part owner in a family company in concrete construction and development.
I could have helped you with your slab....

Bugge r, should've been on here more often. Slab turned out ok, wish I got rid of the top layer of soft dusty crap before the shed went up. PITA to do it with everything in there.

[Pat D]

Still lots of things to do around the shed to manage stormwater, but almost done and slowly getting back into things.

[OzS2]

Hi Pat - looks to be plenty of room in there, do you want to temporarily look after another one which is suffering from the recent rain we've had in Sydney ;-)

John

Sent from my Nokia 7.1 using Tapatalk

[steve briance]

Hello! I've just been browsing through your post and saw your plans to deal with some underseal / corrosion issues around the subframe mounts...

A very good idea indeed. I have had my subframe off to get it galvanised and found trouble lurking under the underseal

I peeled some off by hand and yep, it was wet underneath and yep, corrosion was there.

Check it all and sort it in one go or else you will be back. Don't ask how I know this


The worst bits where I have had to cut metal out are where the old exhaust heat shield was fixed. Notorious rain trap and many a coupe rots there quietly and unseen.

[Pat D]

Hi Pat - looks to be plenty of room in there, do you want to temporarily look after another one which is suffering from the recent rain we've had in Sydney ;-)

John

Sent from my Nokia 7.1 using Tapatalk

Does it run? Bring it!