Drilled the holes for welding.
Announcement
Collapse
No announcement yet.
My Audi S2 coupè Version 2 - full restore - Red rocket from Norway
Collapse
X
-
-
The girbox needed a wash.
I drained the oil, not a bad idea...
Are thise plugs for oil cooling?
I am going to wash i with a heated presurewasher, blast it and paint it black.
Comment
-
-
I got some work done. So here does the bad phone pictures come!
This is the rear seat support, where the previous owner cut a big hole for 2 cables
Comment
-
-
This hole was tricky to fix! Not alot of space to work with and alot of angels on the steel plates.
From the inside of the car.
Comment
-
-
Time for an update, with bad pictures and nearly no texy as always
Alot of parts is delivered for powder coating!
Comment
-
Cut out rusted plates, make new, weld, weld some holes, weld the hold together and grind! Im getting tired of this now... I want to assemble parts on the car!
I blasted this exhaust hanger with sand and sprayed on weld primer.
I cut of this rust pieces.
And made new.
Welded on.
From the other side.
I made this part and i am going to weld it on the inside in the luggage room between the vent and the taillight. The car got this on the other side, so i guess there was one on the other side aswell, when the car was new.Last edited by kinaputt; 8 December 2015, 19:43.
Comment
Comment