Isn't your lamda to way down?
Gesendet von meinem EVA-L09 mit Tapatalk
Gesendet von meinem EVA-L09 mit Tapatalk
-
-
Do you mean the location of the lambda prope on the downpipe? Came like that from iroz. I just added the wideband down by the gearbox and the egt at the lambda.Comment
-
I mentioned the sensor at the gearbox. Does Kot really make sense
Gesendet von meinem EVA-L09 mit TapatalkComment
-
I disagree wideband should be at least 16" away so it is fine very it sits.Comment
-
OK just wondering...
Gesendet von meinem EVA-L09 mit TapatalkComment
-
Isent that from the top And not from the turbo
Then you have the manifold and alle the Way inside the turboComment
-
Zeitronix writes at least 16" away from the turbo.Comment
-
Okay aem Im quite sure says from head ? Odd dont they both use Bosch sensorsComment
-
They do use Bosch sensors. Anyhow it is not used for controlling fuel just to verify.
I have tried to switch location on my coupe and it made no differenceComment
-
Just happened to buy this competition frontlippeYou do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
Where is the front lip from? Website?Comment
-
-
So I have now installed VEMS and got it mapped some what decent to 0.9 bar before it went into winter storage.
I have started operation fake maf so it will still look stock.
So disassemble the maf and milled of the heat sink.
More pictures to come.
For the people using VEMS can the unit be mounted in the same place as the motronic?Comment
-
So here is my fake MAF
Milled of heat sink finns:
Heat sink reinstalled:
Made a small latch to close the holse where the sensor element was:
Installed latch:
Good as new, sort of
Comment
-
Lovely work.
Any news ?
Comment
Comment