Wanted: Volunteers to test product to aid front strut-mounts.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Lago Blue
    S2Forum Maniac
    • Jul 2009
    • 843
    • Country: Canada

    #61
    Roads Report Details Hazards Hidden Beneath the Surface.

    image_81255.png

    Every 4 yrs in the United States, the American Society of Civil Engineers puts out an Infrastructure Report Card for the nation, which covers 18 categories from Aviation to Waste-water. WRT roads, this part of the report is euphemistically called ‘the Pot-hole Indicator’ (I've emphasized one word from the report extract below.) The latest report assigned a grade of D and says that ‘over 40% of the system is now in poor or mediocre condition. Of note, the vast majority of roads in poor and mediocre conditions tend to be on urban and rural collectors and the non-interstate system, while the interstate system tends to be in good condition.’

    They actually measure the surface roughness of highways and road-ways to assess ride quality, and assign a number from what is called the International Roughness Index to each. This helps them prioritize repairs etc. based on science, (instead of political constituency, one supposes!). Unfortunately, the current political situation may not necessarily allow much improvement soon, as budget-balancing has now been passed; to the next generation. The report goes on to say ‘Overall, our deteriorating roads are forcing the nation’s motorists to spend nearly $130 billion each year on extra vehicle repairs and operating costs.’

    The situation nearer to you may be similar. However, those statistics need not include you to the same extent. Don’t get caught out, Strut and Arm-Stops together offer preventative protection unlike much else to your car’s vital and most stressed suspension attachment-point joints. The continued good mechanical health these mods help ensure, does much towards your driving enjoyment including improvements to A-arm bush and top-mount service lives, dynamic wheel alignment, steering response, stability while braking and more. Strut-Stops and Arm-Stops provide for simple, cheap, and effective elimination of several routine maintenance chores that will need re-visiting; a lot less often.
    Last edited by Lago Blue; 30 March 2022, 13:48.

    Comment

    • Lago Blue
      S2Forum Maniac
      • Jul 2009
      • 843
      • Country: Canada

      #62
      Strut-Stops passes six and a half years of independent testing with zero reported top-mount failures and...

      the list of countries represented by forum members determined to overthrow the tyranny of ever-failing top-mounts grows to twelve...

      Welcome Finland!

      Comment

      • LHD_Kid
        S2Forum Possessed
        • May 2006
        • 3696
        • Home: England Current: Belgium

        #63
        Lago Blue pm sent
        Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
        S2 Coupe... bit easier off the line...
        '03 ZX12-R daily hack.... lots of nice bolt ons...

        Comment

        • Lago Blue
          S2Forum Maniac
          • Jul 2009
          • 843
          • Country: Canada

          #64
          Does a surprise package content herald the return of the vaunted 1st choice top-mount?...

          A recent conversation with a fellow forum member (Farhazaftab786g) that began with him asking what top-mount I might recommend, took an unexpected turn as he later related that he had ordered a pair of Sachs 802 453's from Auto Doc and in fact received boxes that said the same, however inside them was this unexpected top-mount (see his photo below).

          Those familiar with the original and (as far as I know) NLA strictly dealer-sourced Audi-BOGE 8A0 412 355 A may recognize that the mount's markings (in the rubber) here are not quite the same as the dealer items (Audi logo, made in Germany, etc. are missing, but does reflect that the box says ZF Aftermarket, Made in China), and the usual wax preservative is not present, but that may not matter. In Canada at least, one never received dealer-sourced top-mounts in a box, let alone one that didn't say it was from Audi.

          And yet this is the final Audi P/N of the last and highest vertical load capacity top-mount (for the heaviest V6 engined cars) and which was never listed in ETKA. I'm therefore quite hopeful that this mount is actually made to the 355A spec., which only ZF of Germany and their partner TMT in China would have knowledge of - through their ownership of the BOGE design, and which along with Sachs, is one of their house brands. Besides, at this late stage they may have realized that, as mounts of this last Audi P/N are (in my view) backwards compatible to the earlier cars, they may need only one or two top-mounts of this type in their aftermarket catalog. Simpler for them and better for us. If that proves to be true, I think Ferdinand von Zeppelin (ZF's founder) would have approved of their decision. Time will tell.

          Some BOGE, Sachs and other company history: https://www.s2forum.com/forum/techni...06#post2077106

          Sachs %22355A%22! Screen Shot 2023-05-20 at 07.21.55.png
          Last edited by Lago Blue; 4 November 2024, 19:11.

          Comment

          • powercar
            S2Forum Fanatic
            • May 2008
            • 93
            • Country: Norway

            #65
            Are these strut stops still available?

            Sent fra min XQ-BC52 via Tapatalk

            IG: Alb garage

            Comment

            • Lago Blue
              S2Forum Maniac
              • Jul 2009
              • 843
              • Country: Canada

              #66
              powercar,

              Yes sir, pm sent.

              Comment

              • Lago Blue
                S2Forum Maniac
                • Jul 2009
                • 843
                • Country: Canada

                #67
                Belgium and Norway join the list of countries with forum members who now have Strut-Stops!

                Comment

                • BLAMM0
                  S2Forum Addict
                  • Aug 2010
                  • 337
                  • Country: Lithuania

                  #68
                  Hi, are these top mounts still available? Can I have more details in PM? Thanks.

                  Comment

                  • Lago Blue
                    S2Forum Maniac
                    • Jul 2009
                    • 843
                    • Country: Canada

                    #69
                    The (top recommended mount for use with Strut-Stops) BOGE suffix 355A top-mounts, are indeed available once more (see post #64 above).

                    Strut-Stop users best source their own top-mounts locally to save on shipping.

                    Strut-Stops are still sold and still quietly stopping our MacPherson struts' damper shafts' upward travel within the top-mounts, while preserving and strengthening only specific P/N'd top-mounts (see which ones and why in posts #39, and #40, also earlier in this thread), with no reported mount failures since their intro circa 2016.

                    PM sent to Blammo.

                    Spain joins list of now 15 countries with forum members using Strut-Stops.

                    Comment

                    • JonRS2
                      S2Forum Enthusiast
                      • May 2008
                      • 126
                      • Country: United Kingdom

                      #70
                      Hi, the link in the first post on page 1 of this thread isn't working for me (at least, not right now). Are your Strut-Stops still available? Would they work on an RS2 with Bilstein B6 front shock-absorbers? I have some unused TRW green top-mounts to go on my car, but will look for some new Sachs 802 453 (which I think equates to 8A0 412 355A) and decide which to go on the car and which to keep as spare. I am not sure if new Sachs 802 453 (8A0 412 355A) are currently available in the UK and, if so, who is selling them. Thanks

                      Comment

                      • Lago Blue
                        S2Forum Maniac
                        • Jul 2009
                        • 843
                        • Country: Canada

                        #71
                        Hi Jon,

                        Yes, I can certainly provide you with a set sir. Yes, they will work with Bilstein B6's on the front of an RS2. I know that U.S. owners are getting these Sachs mounts from the EU. I see the Sachs 802 453 mounts on Ebay from Vego for sale in Germany:

                        https://www.ebay.com/itm/177519339498



                        Comment

                        Working...