Launch control for Motronic

[prj]

YOU ARE HAVING MUCH MORE GOOD LUCK THAN ME BY FAR

And Simons...

[M_GORDON]

Finally...
...YES!

But don't worry Tómas. Sure your 2 machines will be work fine

[Rocco]

Finally...
...YES!

But don't worry Tómas. Sure your 2 machines will be work fine

yes you said "WILL"

[M_GORDON]

yes you said "WILL"

Yes, will. Because NOW don't is perfect.
But I want your not perfect to me

[S2central.net]

Hey guys... try to keep this thread on topic please !

[M_GORDON]

Excuse me

[Rocco]

Hey guys... try to keep this thread on topic please !

please Paul,delete all these waste of time and offtopic posts here

sorry,today was not a very good day for me

[mc1]

whats the best harness to use

Quick question ... I have U S model coupe 1990 . I am planning to put a 20v turbo motor in place of the stock one . My question is..... i have found a low milage motor from an s6 from canada. What is the best wireing harness to use which will be the least amount of a pain. Also would this motor be an aan set up? Thanks

[driftin jo]

Quick question ... I have U S model coupe 1990 . I am planning to put a 20v turbo motor in place of the stock one . My question is..... i have found a low milage motor from an s6 from canada. What is the best wireing harness to use which will be the least amount of a pain. Also would this motor be an aan set up? Thanks

The AAN harness .

[andy10v]

Engine from an s6 will be an AAN

Easiest harness would be a left hand drive s2 aby I would have thought as its small chassis and cop.

[S2central.net]

This is off topic really but yes - LHD ABY harness is the easiest way to go for transplant into a B3 Coupe

[HPmuirt]

On topic Paul: What are the chances of getting in on this VLC shindig, as per my recent PM?

Cheers n

Si

[S2central.net]

Will pm you back ASAP - the lovely linear idea isn't working just yet but it's perfectly usable without it - unless you want to fine adjust at silly high revs

[BennyBoo]

I run a WOTBOX..

It cuts ignition at a user set rev limit so it builds boost, also has the option to 'no lift shift'

I love it, and the pops and bangs when shifting make me smile...

[prj]

I run a WOTBOX..

It cuts ignition at a user set rev limit so it builds boost, also has the option to 'no lift shift'

I love it, and the pops and bangs when shifting make me smile...

So?
I can guarantee you that your turbo and exhaust manifold do not smile when you dump fuel into the manifold.
The no-lift shift does not take into account gear ratios either, just a delay.

I can do ignition retard as easy as 1-2-3 in Motronic, but I choose not to, because safety is more important and it's good enough without, and it easily builds boost as well, which you would have known, if you'd bother to read the thread.
Not to mention the wotbox costs 200$ before shipping and VAT, and requires running all the ignition wires to it, altering the harness etc... while this is plug and play.

So what is the point of your post?
Trolling? Advertising? Take it elsewhere.