You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
This part is a little confusing. These are
Porsche Panamera / late Cayenne Turbo S calipers (4.8 V8 NOT 4.5 V8 which came with the 19Z's). They are larger than 18Z's so not exactly the same.
These are the part #'s
955-351-421-70
955-351-422-70
Not without adapters.Both 18Z & 19Z use a 146mm Centre to Centre on the axial mount
Same goes for B8 S4/S5/RS4/RS5 so if your C6 has a 146mm centre to centre then you can use them.
HTH
Issam
Yes the calipers were taken from 957 Cayenne 4,8 V8...
Thanks for the correction.maybe i'm confused between the number from Porsche PCD which has 5x130mm. I have HP2 struts and any Porsche big chassis with axial(side) mounts is bolt right up.
I have HP2 struts and any Porsche big chassis with axial(side) mounts is bolt right up.
Issam/Wizard: In case you didn't know this, all the Canadian/US C4 UrS4/S6s got Girling G60 front brakes on "special" wheel bearing housings. In the rest-of-the-World (ROW), the UrS4s started out with "UFO" front brakes on unique wheel bearing housings. By some time in 1993 model year, there was a switch to the "HP2" calipers on yet again a third C4 UrS wheel bearing housing, not found in NAmerica (unless specially imported as a part). The HP2 brakes and their associated wheel bearing housings were then used on the 94 UrS4s and the 95-97 UrS6s in the ROW. This is the wheel bearing housing that Pop has on his UrS6 in Thailand.
The Audi Enthusiast website. Forums for all Audis including A4, S4, A5, S5, A6, S6, allroad, A8, S8, TT, R8, Q5, Q7, 4000, 100, 200, v6, v8, vintage, local forums
The Audi Enthusiast website. Forums for all Audis including A4, S4, A5, S5, A6, S6, allroad, A8, S8, TT, R8, Q5, Q7, 4000, 100, 200, v6, v8, vintage, local forums
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
Thomas,
i believe you could use stock brake hoses if the length
is enough when turning the wheel lock to lock.fortunately,
i have a pair of old SS goodridge from a nissan 350z.i had them on
urs6 and worked well.
Did bought HEL's Golf mk2 to Brembo braided hose kit. They seems to be 450mm in lenght with a nice 90 degree elbow on the caliper side. Hope they will be good...
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Did bought HEL's Golf mk2 to Brembo braided hose kit. They seems to be 450mm in lenght with a nice 90 degree elbow on the caliper side. Hope they will be good...
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment