Hydraulic to Vaccum servo conversion
Collapse
This is a sticky topic.
X
X
-
Guys, what hose/line you fit from manifold to booster? And what about one way valve? There is 191611933E with two outlets. -
I want to use Audi 80 TDI vacuum brake booster with mine 7A master cylinder. I am waiting for that brake booster which i orderedLeave a comment:
-
Over here this seems to give me a master cylinder ... Ans it is not in 7zap either.
Any other suggestions ?
Would this fit ?
191612107A
357612107A
Brake Pressure Booster for 89-95 Corrado, 85-92 Golf, 85-92 Jetta, 90-97 Passat. ?
If I use the 7a master cylinder ? or will the one with the model mentioned above work (if I replaced the 7a with it) ?
ThanksLeave a comment:
-
I tried to find 8A2612105A here in North America (canada) and it seems pretty rare ...
Anyone knows one that came from a car that was sold in North America that would do the trick ? i.e. that I can source in a scrap yard ?
CheersLeave a comment:
-
I have a bolt-on conversion kit for the dual stage servo:
https://www.s2forum.com/forum/member...conversion-kit
Attached FilesLeave a comment:
-
Guys, i read whole topic, but i am not clever from it
I have CQ 20V 7A B3 . I want to change hydraulic to vacuum booster. Someone said A8 D2 , another A8 D3. What is the best solution and not expensive and hard to find? I know that master cylinder could be used oem 7A which is 25.4mm but that vacuum booster bothers me 
Leave a comment:
-
You can not see the photos, could you upload them again? I'm interested in making the change.Hi Guys,
sometime last year i fitted the a8 d2 brake booster and master brake cylinder in my 7A quattro coupe and i thought it might be interesting for one or the other...
7x8 inch brake booster combined with the 25,4mm master brake cylinder.
the other option would be the 26,9mm i guess. but that would be overkill.
adapter plate needs to be fabricated. otherwise the brake booster will be leaky.
a6 v6 hydraulic steering pump. quite the same pump used for a long time at audi.
a4 b5/b6 or B4 v6 is also the same. bolt on directly to the 7A bracket.
brake booster without grommet. you see these tubes coming out of the brake booster for the bolts.
the "tubes" are not the same level as the brake booster surface. thats the reason for the adapter plate i made.
adapter plate alignment.
difference between the hydraulic spacer (short one) and the vacuum spacer (long one).
adapter rod and the grommet mounted.
adapter plate, vacuum spacer, adapter rod and that kind of fork mounted.
this adapter needs to be fabricated to increase the rod length:
ready for installation:
REGARDSLeave a comment:
Leave a comment: