I have bought a K26/27 turbo which im going to use on my car. But im looking at a Garret GT 3071 turbo. But im not sure what to do yet.........the turbo i have is flowprepped and ported so it will give full boost earlier than a regular K26/27 turbo. Is there anyone in here who uses a Garret GT 3071 turbo ?? When is full boost ?
-
2003 VW Passat Highline 130 TDI wagon with ALL options. -
search for threads +400 pekka and RS2 Comp turbo.
the GT2871 and 3071 seem to be the turbo's of choice at the moment. -
You can say that again, got 2 of 1 and 1 of the other. I have never seen a turbo that you can blow into the compressor outlet (with you breath) and the wheel spins.Originally posted by JamoCorey
01636 822288Comment
-
May i ask which one you are using on what car with what setup ?Originally posted by Corey
2003 VW Passat Highline 130 TDI wagon with ALL options.Comment
-
Originally posted by Corey
i tried to do that with my T04e ...... Not a chance 
sigpicComment
-
Sure, it's no secret.Originally posted by S4-SledenMay i ask which one you are using on what car with what setup ?
GT3071 - 10v ur (mine) tubular exhaust manifold, 3" downpipe and exhaust (with seperate w/g vent and side exit tailpipe), 034 IIc ecu with coil per cylinder and lots of other stuff. Plus a bit of magic thrown in.
GT2871 - 10v ur see above
GT2871 - 20v (3B) 200 see above but ignore the IIc bit as we are sticking with Moronic for nowCorey
01636 822288Comment
-
Originally posted by Jon441cc i tried to do that with my T04e ...... Not a chance
How are your lungs?Corey
01636 822288Comment
-
One word of advice to anybody wanting to use the GT series of turbos make sure you use/order an oil restrictor
http://www.034motorsport.com/product...products_id=74
Don't find out the hard way.Corey
01636 822288Comment
-
Im sure i read a while back about a chap on here getting the water and oil lines mixed up on Garret hybrid.
sigpicComment
-
Corey: So you need a restrictor for GT30R also from 034 ?Vadim.
New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !Comment
-
I believe you need a restrictor for a majority of garret turbo's as they only need 15psi of oil pressure.
sigpicComment
-
YesOriginally posted by SweeperCorey
01636 822288Comment
-
Corey, how much is there differrence in reaction between 2871 and 3071 ?4F 2006 avant 3.0tdi quattro
4B 2002 S6 avant quattro
typ85 sedan quattro with "minor" changesComment
-
Do you know the 3K part number of this turbo?Originally posted by S4-Sleden
Should be on the blue plate secured to the side of the comp housingS2 Avant......fully loaded :rock: :bow: Slipper Wagons Rule !!!!!Comment
Comment