Timing belt change

[Chris5044]

Hey thank you this is great advice, but atm I cannot source a crank pulley -- or a crank bolt from anywhere, or that washer. Am I literally out of options here? :/

[Tractor Dave]

Hey thank you this is great advice, but atm I cannot source a crank pulley -- or a crank bolt from anywhere, or that washer. Am I literally out of options here? :/

Audi Tradition do the bolt, Ebayde the washer and terrybullone (here) the pulley.

https://www.s2forum.com/member/2911-terrybullwon

https://www.ebay.co.uk/itm/Diamantsc...oAAOSw2KlcwAg3

(I can't find the bolt on AT at the moment. Eyes getting fuzzy. If they haven't got it anymore, I have a Febi one that I bought before I got one from AT

[Chris5044]

Hey guys its ok chill. We are exchanging info here. For the love of the forum and our enthusiasts. all good. thanks for the advice dudes x

[Chris5044]

Huge thanks again. Audi tradition havent got back to me and im trying to get all parts before the weekend to do the job.. thx for help..

I've managed to see a post on another forum for a crank bolt replacement / vag and bmw parts, but I dunno how good this is. I will try and wait for audi tradition.. but been 2 days and I can only email them..

Crank bolt (orig part No: 034 105 229 A):
https://forums.quattroworld.com/s4s6/msgs/344140.phtml
VAG N90498002 (part threaded)
or VAG N0101432 (Febi 17230) (part threaded)

https://forums.quattroworld.com/s4s6/msgs/344214.phtml

or BMW 11231736585 (part threaded)

https://www.autohausaz.com/pn/BM-11231736585

(These parts have no thread on the small section nearest the bolt head, the rest is threaded till the end of the bolt - all bolt heads are the same for all shown)

or The 110mm long Febi (VAG N90498002, Volvo 9186595) is fully threaded

I googled the part number of the crank pulley, you are right terry does them, but i cant get it till next week.

Crank pulley source discovered:

https://www.autodoc.co.uk/car-parts/oem/034105263a


Is Terry's Crank Pulley stronger than OEM? If so - I may wait for this..

[mac2226]

Try quattro corner Pete reeve he can get you the belt and bolt sorted and the diamond washer I bought last one about 6 months ago in uk but have seen them for sale Ebay.de timing pulley just replace it with a Terry bullwon version

[Chris5044]

Thank you, I just bought a diamond coated washer from ebay.de -- jesus h!!! That cost is stupid!! 39 euro for part then 18 euros to send .. arghhh!!
Ok well since its coming frpm Germany Im not looking at getting it by the weekend now :/ .. mehh.. will get terry's crank pulley thx, and ill ask quattro corner...

ah man.. ill kick myself if it can be sent to me within time ..

Have seen a possible crank bolt substitute, vag part on ebay, theres loads, but dont know if it fits.....

https://www.ebay.co.uk/itm/Crank-Sha...cAAOSwC0dbqlNy

[LHD_Kid]

James's pulley (Terrybullwon) is WAY stronger than oem (oem is basically a service item, James's is fit and forget.)

Wait for his

[rxl]

James's pulley (Terrybullwon) is WAY stronger than oem (oem is basically a service item, James's is fit and forget.)

Wait for his

his pulley is the best out there what you can buy. i had them all and believe me its worth the money.

[Mikes2]

I always re-use the bolt if it's not damaged and the threads are clean. It's not a requirement to replace it

[Bowie69]

Indeed, it's not a service item, I've never changed mine.

[RAOUL]

How much are James’s bottom pulleys & are they still available?

[Greg_S]

How much are James’s bottom pulleys & are they still available?

Drop terrybullwon a message. Also check on ebay too. They are about £110 i think

[s2driveruk]

Ok so whats the deal with the diamond washer...? Never seen this before, is is treated in a particular way during production or something equally as funky or is it just dimensions...? If these are NLA, maybe we can get some made and hold a stock on the forum?

[rxl]

It goes on the nose of the crankshaft. I have one for sale

[newsh]

Ok so whats the deal with the diamond washer...? Never seen this before, is is treated in a particular way during production or something equally as funky or is it just dimensions...? If these are NLA, maybe we can get some made and hold a stock on the forum?

You’ve been here how long?