Hey thank you this is great advice, but atm I cannot source a crank pulley -- or a crank bolt from anywhere, or that washer. Am I literally out of options here? :/
Announcement
Collapse
No announcement yet.
Timing belt change
Collapse
X
-
Originally posted by Chris5044 View PostHey thank you this is great advice, but atm I cannot source a crank pulley -- or a crank bolt from anywhere, or that washer. Am I literally out of options here? :/
https://www.s2forum.com/member/2911-terrybullwon
https://www.ebay.co.uk/itm/Diamantsc...oAAOSw2KlcwAg3
(I can't find the bolt on AT at the moment. Eyes getting fuzzy. If they haven't got it anymore, I have a Febi one that I bought before I got one from ATLast edited by Tractor Dave; 30 April 2019, 22:38.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Huge thanks again. Audi tradition havent got back to me and im trying to get all parts before the weekend to do the job.. thx for help..
I've managed to see a post on another forum for a crank bolt replacement / vag and bmw parts, but I dunno how good this is. I will try and wait for audi tradition.. but been 2 days and I can only email them..
Crank bolt (orig part No: 034 105 229 A):
https://forums.quattroworld.com/s4s6/msgs/344140.phtml
VAG N90498002 (part threaded)
or VAG N0101432 (Febi 17230) (part threaded)
https://forums.quattroworld.com/s4s6/msgs/344214.phtml
or BMW 11231736585 (part threaded)
https://www.autohausaz.com/pn/BM-11231736585
(These parts have no thread on the small section nearest the bolt head, the rest is threaded till the end of the bolt - all bolt heads are the same for all shown)
or The 110mm long Febi (VAG N90498002, Volvo 9186595) is fully threaded
I googled the part number of the crank pulley, you are right terry does them, but i cant get it till next week.
Crank pulley source discovered:
https://www.autodoc.co.uk/car-parts/oem/034105263a
Is Terry's Crank Pulley stronger than OEM? If so - I may wait for this..Last edited by Chris5044; 30 April 2019, 23:11.
Comment
-
Thank you, I just bought a diamond coated washer from ebay.de -- jesus h!!! That cost is stupid!! 39 euro for part then 18 euros to send .. arghhh!!
Ok well since its coming frpm Germany Im not looking at getting it by the weekend now :/ .. mehh.. will get terry's crank pulley thx, and ill ask quattro corner...
ah man.. ill kick myself if it can be sent to me within time ..
Have seen a possible crank bolt substitute, vag part on ebay, theres loads, but dont know if it fits.....
https://www.ebay.co.uk/itm/Crank-Sha...cAAOSwC0dbqlNy
Comment
-
James's pulley (Terrybullwon) is WAY stronger than oem (oem is basically a service item, James's is fit and forget.)
Wait for hisHonda CBR 1100XX Blackbird Turbo....undergoing major changes.....
S2 Coupe... bit easier off the line...
'03 ZX12-R daily hack.... lots of nice bolt ons...
Comment
-
-
Originally posted by RAOUL View PostHow much are James’s bottom pulleys & are they still available?Greg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeks
Comment
-
Originally posted by s2driveruk View PostOk so whats the deal with the diamond washer...? Never seen this before, is is treated in a particular way during production or something equally as funky or is it just dimensions...? If these are NLA, maybe we can get some made and hold a stock on the forum?
Comment
Comment