Urgent! Need one of these fast!! Crank torsional vibration damper.on front of engine

[Chris5044]

According to 7Zap bolt is N0102186

M6x25

Search on google shows OE was 10.9

Huge thank you trackor Dave, legend!

[Antsa]

This has happened before to some forum member and the 20nm for the m6 bolt is way too much for it. When I did mine I used my wrist-o-meter torque wrench to prevent the bolts from snapping and it had been fine ever since.

[Fat Audi 80]

This has happened before to some forum member and the 20nm for the m6 bolt is way too much for it. When I did mine I used my wrist-o-meter torque wrench to prevent the bolts from snapping and it had been fine ever since.

Yep, you don't need a torque wrench for everything.

[Error404]

OEM is 12.9. Torque on this should be 15nm.

[Chris5044]

Thank you everyone! yes my wristometer was saying no!! too high!! but i was following torque setting.. have ordered OEM from Audi - will pickup in the week. I think I should do a progress update on my car as a thread. Have lots of photos and hard work going into her.

[4WDrifter]

Is the intercooler destroyed or just marked/ scored?

[Chris5044]

Is the intercooler destroyed or just marked/ scored?

Hey 4wdrifter!! Its been awhile matey, you good?

Its just marked, but it scores into the rail a little, but doesnt break into the system, which has me thinking of putting jb weld onto it and observe for a year or 2 then upgrade, when I go for more power x

[Chris5044]

Does anyone on here know if this will work on my ABY?
Zap is giving me multiple part numbers and it is very confusing

https://www.ebay.com/itm/034105251A-...sAAOSwR1Fd2Plp

[Tractor Dave]

No, I don’t think it will.
You need one like this.



Sent from my iPhone using Tapatalk

[Tractor Dave]

One I happen to have on my bench right now.

Part number looks like 034105251M




Sent from my iPhone using Tapatalk

[Chris5044]

I've worked out this is the part number I am after!
Pm sent!!

[Tractor Dave]

Here it is with damper removed from pulley
Sorry, not for sale. It’s from the engine I’m rebuilding.



Sent from my iPhone using Tapatalk

[Bowie69]

There's a couple of used ones on eBay, but sit down for the price.

[Chris5044]

There's a couple of used ones on eBay, but sit down for the price.

[Bowie69]

On the plus side, I have bought from them a few times, good seller.