Originally posted by Tractor Dave
View Post
Announcement
Collapse
No announcement yet.
Urgent! Need one of these fast!! Crank torsional vibration damper.on front of engine
Collapse
X
-
Originally posted by Antsa View PostThis has happened before to some forum member and the 20nm for the m6 bolt is way too much for it. When I did mine I used my wrist-o-meter torque wrench to prevent the bolts from snapping and it had been fine ever since.The Perfectionist
sigpic
Audi Class Concours winner Stoner Park 2014, ADI Concours D'Elegance Class Winner 2008, Runner up 2014. Winner, S2Forum Show'n'Shine Billing 2006 & 2008.
Comment
-
Thank you everyone! yes my wristometer was saying no!! too high!! but i was following torque setting.. have ordered OEM from Audi - will pickup in the week. I think I should do a progress update on my car as a thread. Have lots of photos and hard work going into her.
Comment
-
Originally posted by 4WDrifter View PostIs the intercooler destroyed or just marked/ scored?
Its just marked, but it scores into the rail a little, but doesnt break into the system, which has me thinking of putting jb weld onto it and observe for a year or 2 then upgrade, when I go for more power x
Comment
-
Does anyone on here know if this will work on my ABY?
Zap is giving me multiple part numbers and it is very confusing
https://www.ebay.com/itm/034105251A-...sAAOSwR1Fd2Plp
Comment
-
One I happen to have on my bench right now.
Part number looks like 034105251M
Sent from my iPhone using TapatalkLast edited by Tractor Dave; 25 July 2020, 20:56.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
Comment