Stalling issue

[Corey]

We got the car up and running today on the prototype kit, it will need a remap if you move the MAF to the pressure side.
We are mapping tomorrow evening to get it running as it should so the customer can have his car back Saturday, but all stalling issue's have been solved the car now drives as it should and just idles soooooo smooth, you can now be very aggressive with the throttle (on and off), whereas before doing this would cause a stall.
I will put some images up tomorrow.

[kjetil fykse]

We got the car up and running today on the prototype kit, it will need a remap if you move the MAF to the pressure side.
We are mapping tomorrow evening to get it running as it should so the customer can have his car back Saturday, but all stalling issue's have been solved the car now drives as it should and just idles soooooo smooth, you can now be very aggressive with the throttle (on and off), whereas before doing this would cause a stall.
I will put some images up tomorrow.

Have you got any updates with the adjustmets that was needed when the re-map was done?

[Corey]

Have you got any updates with the adjustmets that was needed when the re-map was done?

The map is being tweaked on Thursday evening now due to timescales, will update accordingly but I believe the owner is now happy that his S2 doesn't stall after he has given it some

[prosty]

Where is the air filter located? In the stock box?

[Corey]

RS2 airbox still, we have a fake MAF in place, lovingly modeled by Jim.


and a more normal shot

[Jonas_R]

Hi Corey,

What kinda hose did you use for this job? Cuz I was considering moving my MAF and this looks fairly simple

Any problems with heat?
How about problems with the MAF hitting the valve cover?

And what are you using to connect with the RS2 airbox?

/Jonas R.

[Efini]

I need a kit!
Getting tired of keeping my foot on the accelrator at all times to prevent stalling..

Did you manage to reach the new MAF location with the stock MAF wire?

[Corey]

Wires had to be extended

[Markarina]

It seems I have another enforced month of work coming up, do you want to do another one ?, and how long do you need the car for and how will it cost ??

[kjetil fykse]

The map is being tweaked on Thursday evening now due to timescales, will update accordingly but I believe the owner is now happy that his S2 doesn't stall after he has given it some

Still waiting on some updates here...

[Corey]

Car has been remapped to allow for the different MAF location and the car doesn't stall anymore, sorry for not updating we have been busy moving this week and our time on the forum has been limited to (very) early mornings and (very) late into the evenings.

[Jon441cc]

Good work Corey, what did you you have to change on the map to convert it ?

[s2dude]

I'm still looking for the 80-60mm reducers.

These guys are awesome and sell a Samco that will do it though you may need to get one a couple of mm too large for one end

Clicky

[kjetil fykse]

What changes was needed when remaping, and why?

[Chris M]

These guys are awesome and sell a Samco that will do it though you may need to get one a couple of mm too large for one end

Clicky

Cheers, found a good retailer for them now, see how it all comes together.

Cheers,