Announcement

Collapse
No announcement yet.

EV14 Fuel adaptor differences

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Spacer - TOP14-CLIP-F http://www.finjector.com/verkkokaupp...nt/view/2185/9
    Connector - USCAR-JET http://www.finjector.com/verkkokaupp...t/view/1270/39

    Comment


    • #77
      Or stock 530cc injector http://www.finjector.com/verkkokaupp...t/view/2710/88 would only need connectors with them as they come with the spacer

      Comment


      • #78
        Cheers Jamo!

        With filter is the best way to go then?

        Comment


        • #79
          I bought the spacer with a filter built in, it doesn't seem to be restrictive to the flow, no harm in a little extra protection against a clogged injector!

          Based on finjector's comments to Vas I think it's a good idea to go with the spacer, clip + filter set-up - the same as what me, Vas, Jamo, Sonic are using and the same as Jamo's link below
          AUDI - saving Dad's from minivans since 1994

          Comment


          • #80
            I'm not using them yet! Engine is in bits and pieces. Will let you know sometime the following week. But yes, the extra filter is not a bad thing, and they have been used in much larger flow injectors without problems.

            sent using Android

            Comment


            • #81
              I've put them on as a test fit perfectly will permanently install soon but IM needs to be removed

              Comment


              • #82
                Ok thank you guys

                Comment


                • #83
                  Made a sticky ev14 users note

                  Comment


                  • #84
                    Sorry. Forgot to update. Clips work nicely, but for adapters I would use as plugs the ones with a bit of cable as the straight plastic ones are a bit difficult to meet the plugs.

                    sent using Android

                    Comment


                    • #85
                      Could these EV14 injectors be used as direct replacement (including adapter hats) for the stock AAN injectors?
                      http://www.fiveomotorsport.com/0280158233-280cc

                      Looks like the flow rates are the same as stock.
                      '96 UrS6 auto PRJ chipped E85
                      '95 80Q AEB VEMS E85

                      Comment


                      • #86
                        So, is the key to get these injectors seating good, to drill out the holes in the fuel rail ? Got mine pissing all over now, seems like I did not drill out enough...... Just asking if there is any other good tricks yo get these stopping to leak whenever they feel like it.
                        Audi Rs2
                        Audi A3 Sportback
                        Ducati 1098R

                        Comment

                        Working...
                        X