Quattroboy, the valve should be open for vacuum, and closed on boost, its difficult to get to, down behind the throttle body. There are some differences between 3B and ABY breather systems I believe, mine is 3B. Don't know which other cars have the same part.
My oil leak, breathers etc, advice needed...
Collapse
X
-
-
little bit of reading about the valve.
Greg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeks
Comment
-
Well in my etka i have pricesOriginally posted by horvathgJonas, how did you find out the price? Our list doesn't even give us a part number. Any help with the number would be appreciated. DDecided to replace it too.
i used the part number that i got in this thread, and searched etka for the part.
/Jonas R.Comment
-
By the way, is there anyone here on this forum who DOESN'T know this feeling described by Newsh ''''''No problems with idle but sometimes the car would feel really flat at full throttle, not full power even though showing plenty of boost.'''''''A really rapsodic type of car...
Gabor
96 ABY coupe full except sunroof. With Porsche big red brakes, remapped ECU, xenon lights, RS2 MAFComment
-
Do you need to get the throttle body off to change it?Originally posted by newshQuattroboy, the valve should be open for vacuum, and closed on boost, its difficult to get to, down behind the throttle body. There are some differences between 3B and ABY breather systems I believe, mine is 3B. Don't know which other cars have the same part.
And how difficult would you say it is to change the cam cover gasket? Anything in particular that one should be aware off?
/Jonas R.Comment
Comment