rs2 timing belt

**macspring** · 1 July 2014, 22:15

Hopefully, it will all be academic soon, when Hank makes it easier for all of us to upgrade to the 07K engine.

It seems way better in lots of ways.

**pasbogdan** · 2 July 2014, 14:39

The SKF they sell for adu is 29 teeth

**rxl** · 2 July 2014, 14:40

Its the wrong one...

**Error404** · 2 July 2014, 15:05

I have not seen enough used blocks to have a strong opinion, but FWIW I have noticed that 3B blocks seem to wear less for similar mileage than later ABY & AAN blocks so maybe they went cheaper on the material?

**irishs2** · 2 July 2014, 15:09

Originally posted by Error404

I have not seen enough used blocks to have a strong opinion, but FWIW I have noticed that 3B blocks seem to wear less for similar mileage than later ABY & AAN blocks so maybe they went cheaper on the material?

Distributor problems causing a more rigorous service schedule.

**Error404** · 2 July 2014, 15:42

**pasbogdan** · 2 July 2014, 20:23

**veneto rs2** · 2 July 2014, 23:46

Originally posted by pasbogdan

Ok.The rear of the pump is the same?

Yes

**sailaz** · 3 July 2014, 06:28

Originally posted by pasbogdan

The SKF they sell for adu is 29 teeth

just wondering how many teeth has BGA CP18558 because in some catalogs it is given as analog for original VAG 034121004B

**fridtjov-audirs2** · 15 July 2014, 01:05

How deliver timing belt for RS2 now?

**rxl** · 15 July 2014, 04:55

Audi Traditions have it on stock.. i payed 65euros incl. posting

**tommi78** · 22 August 2014, 17:19

Adu timing belt

Hello

Where I can buy new belt for my RS2(034 109 119 C)? It seems that no body is selling 150 teeth belt any more.

**rxl** · 22 August 2014, 17:24

Originally posted by tommi78

Hello

Where I can buy new belt for my RS2(034 109 119 C)? It seems that no body is selling 150 teeth belt any more.

true

got the last belt so its seems...
anyway somebody has bought a few timing belts and is selling them if your willing to pay the price http://allegro.pl/pasek-rozrzadu-aud...424300761.html

**Error404** · 22 August 2014, 17:56

Just use a normal ABY/AAN belt. The length of the belt makes no difference as long as it is tensioned correctly. The number of teeth on the crank sprocket and cam wheel are what matters

**diesel des** · 28 August 2014, 10:02

Guys do any of the aftermarket companies make a proper rs2 belt eg 19 mm wide 150 teeth 034 109 119 C? Or has anyone talked to a drive belt company to get these made. Seem to have 8mm pitch. I need a proper adu rs2 150 tooth belt for my stroker build. I couldn't find these on audi tradition. Help! Cheers des

rs2 timing belt

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment