500hp turbos- part 2

[ProX]

What think about this turbo with wagner sq evo manifold? http://turbobandit.com/TURBO-Engine-...argers/billet3

[ProX]

Here writes that good for audi 5cyl http://turbobandit.com/TURBO-Engine-...argers/TB60-02

[sandman1111]

Doesn´t look very efficient for anything higher than 1.2 bar. Compressor map is quite bad.

[ProX]

This one use TB-70 https://m.youtube.com/watch?v=D9SHlZQPO50

[sandman1111]

Well not many ppl have used those turbos, so no idea how you can get any info about them. And by looking at the compressor map of the tb60, it is bad. It does not spool fast and it is not effiently making 500 hp. Lets say you need 2 bar to reach 500hp, this compressor map isn´t even showing that much pressure. what do you want to achieve? If you feel like you need to experiment with something new, try Masterpower.eu turbo, or if you got anyone who can match turbine housing get a BW s200sxe.

[Quattronaut]

The maps are bul**hit. If the maps are real- the turbos are bul**hit. Stay away from these backyard-tuners or "-brands", stay with wellknown ones. They are worth the money.

[Quattronaut]

Got better specs and pics of the turbo. Some info was wrong. It has 54/76mm compressor and 74/62mm turbine with .48 a/r housing. Could be quite early spooling..? New modified turbo with watercooling.

I don´t know if this really is a garrett...maybe a chinese copy. That shoul be something like a Garrett 3876, never heard of something like that. And the 0,48 is too small.

[ProX]

okei But how run this 200 20v? with TB70-02?
And Most Of people with 2.2 use those turbos in Norvegian ,Sweden and Finland.

https://www.youtube.com/watch?v=6qrp3Gvvg5E

https://www.youtube.com/watch?v=LMLrcW7SBSI

https://www.youtube.com/watch?v=k0dGc1Ky5E4

http://www.garaget.org/?car=67260

http://www.garaget.org/?car=287622

[sandman1111]

TB70 is very different than TB60 you wanted. It is also not anything great, but yeah it works. But for the price, there´s better turbos, that cost as much.

Ask him, he has been running TB60 turbo. Theres also a dyno graph.

http://www.s2forum.com/forum/showthread.php?t=63845&page=6

[ProX]

Op thanks asking him
In Tallinn are official dealer of TB

[prj]

Turbobandit are chinese turbos with some quality control.
Mapped a few, I also know who runs the operation.

Basically you get what you pay for. It is not as efficient as a big brand turbo, then again it also does not have the price tag. I've not heard of reliability issues (that is where the QC comes in)...

[vti2]

Garrett GTW34 is also a good Choice for 500hp

[sandman1111]

Anyone got some info/experience with turbosystems? They are located in Lithuania. Not sure how big is their sortiment, but pictures are nice, look a lot like Holset.

Sent from my D5803 using Tapatalk

[Thuppu]

I don´t know if this really is a garrett...maybe a chinese copy. That shoul be something like a Garrett 3876, never heard of something like that. And the 0,48 is too small.

Your right, it wasn't fully Garrett, it's an Comp Turbo with Garrett compressor housing. Seller tought it was Garrett...

Comparison between my old Turbonetics T3 A/R .63 55mm vs this T3 A/R .48 62mm. Not much difference, the netics housing has more meat on the exducer side as it's a wg model.





I made 380hp @ 1,7bar with my old Garrett with the netics housing and fübar 55mm turbine wheel. If now 450hp is reached with decent spool then I'm happy(yea right ).


Edit.

One more pic of the housing feed to turbine. This 14mm vs old 12mm.

[Error404]

Thomas you are never happy with "enough" power