What think about this turbo with wagner sq evo manifold? http://turbobandit.com/TURBO-Engine-...argers/billet3
Announcement
Collapse
No announcement yet.
500hp turbos- part 2
Collapse
X
-
Here writes that good for audi 5cyl http://turbobandit.com/TURBO-Engine-...argers/TB60-02Audi Urs4 2.2T Albert K26 Turbo
Audi 80 B4 quattro 2.2T 10v
Audi V8 4.2 Manual +LPG SELL
Audi A6 C4 2.5Tdi
VW LT28 2.0 r4 55kw Fire vehicle
Comment
-
This one use TB-70 https://m.youtube.com/watch?v=D9SHlZQPO50Audi Urs4 2.2T Albert K26 Turbo
Audi 80 B4 quattro 2.2T 10v
Audi V8 4.2 Manual +LPG SELL
Audi A6 C4 2.5Tdi
VW LT28 2.0 r4 55kw Fire vehicle
Comment
-
Well not many ppl have used those turbos, so no idea how you can get any info about them. And by looking at the compressor map of the tb60, it is bad. It does not spool fast and it is not effiently making 500 hp. Lets say you need 2 bar to reach 500hp, this compressor map isn´t even showing that much pressure. what do you want to achieve? If you feel like you need to experiment with something new, try Masterpower.eu turbo, or if you got anyone who can match turbine housing get a BW s200sxe.
Comment
-
Originally posted by Thuppu View PostGot better specs and pics of the turbo. Some info was wrong. It has 54/76mm compressor and 74/62mm turbine with .48 a/r housing. Could be quite early spooling..? New modified turbo with watercooling.
Comment
-
okei But how run this 200 20v? with TB70-02?
And Most Of people with 2.2 use those turbos in Norvegian ,Sweden and Finland.
https://www.youtube.com/watch?v=6qrp3Gvvg5E
https://www.youtube.com/watch?v=LMLrcW7SBSI
https://www.youtube.com/watch?v=k0dGc1Ky5E4
http://www.garaget.org/?car=67260
http://www.garaget.org/?car=287622Last edited by ProX; 15 September 2016, 17:37.Audi Urs4 2.2T Albert K26 Turbo
Audi 80 B4 quattro 2.2T 10v
Audi V8 4.2 Manual +LPG SELL
Audi A6 C4 2.5Tdi
VW LT28 2.0 r4 55kw Fire vehicle
Comment
-
TB70 is very different than TB60 you wanted. It is also not anything great, but yeah it works. But for the price, there´s better turbos, that cost as much.
Ask him, he has been running TB60 turbo. Theres also a dyno graph.
http://www.s2forum.com/forum/showthr...t=63845&page=6Last edited by sandman1111; 15 September 2016, 17:52.
Comment
-
Turbobandit are chinese turbos with some quality control.
Mapped a few, I also know who runs the operation.
Basically you get what you pay for. It is not as efficient as a big brand turbo, then again it also does not have the price tag. I've not heard of reliability issues (that is where the QC comes in)...
Comment
-
Originally posted by Quattronaut View PostI don´t know if this really is a garrett...maybe a chinese copy. That shoul be something like a Garrett 3876, never heard of something like that. And the 0,48 is too small.
Comparison between my old Turbonetics T3 A/R .63 55mm vs this T3 A/R .48 62mm. Not much difference, the netics housing has more meat on the exducer side as it's a wg model.
I made 380hp @ 1,7bar with my old Garrett with the netics housing and fübar 55mm turbine wheel. If now 450hp is reached with decent spool then I'm happy(yea right ).
Edit.
One more pic of the housing feed to turbine. This 14mm vs old 12mm.
Last edited by Thuppu; 19 September 2016, 16:36.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
Comment