New Wagner Cast Exhaust Manifold

[Jamo]

the first Run will be here mid November. The Price is between 620 and 650 Euro.
It depense to the Nickel Cost... 35% Nickel

thx to all for Waitíng

This is excellent news

[merlin's S4]

the first Run will be here mid November. The Price is between 620 and 650 Euro.
It depense to the Nickel Cost... 35% Nickel

thx to all for Waitíng

I take it this is for the RS2 replica?

[Jamo]

"RS2 Evo Manifold"

Merlin it was posted earlier see above

[merlin's S4]

Just clarifying!! There's been talk about the RS2 and the Sport replica in this thread.

[Billman]

100 Euros up from the first price.

And what should be the price for the SQ- RSR or whatever it is called?

[Bram]

the first Run will be here mid November. The Price is between 620 and 650 Euro.
It depense to the Nickel Cost... 35% Nickel

thx to all for Waitíng

Good to hear the factory has it's molds in place. For 550 Euro it would be a winner I think. Actually I would like one of these..... Let's see what the final price will be.

[Bruno]

Alloy

the first Run will be here mid November. The Price is between 620 and 650 Euro.
It depense to the Nickel Cost... 35% Nickel

thx to all for Waitíng

Hello!
Im wonder if you can tell something about the alloy and development of the replika
Rs2 manifold?
Do you have any knowledge of the construction on the original Rs2 manifold?
So the Wagner manifold will not have the same heat crack error as
original Rs2 manifold.

[Matt_D]

Bruno its not so much heat cracking thats the problem, there is no provision for movement in the stock exhaust over bumps etc so with the heat the it 'bends' slightly and cracks

[A80Avant]

i always thought that the movement of the exhaust could be made through the springs holding the cats.Also the wastegate can move due to the 'springlike' connection to the manifold

[Lupo911]

Hello!
Im wonder if you can tell something about the alloy and development of the replika
Rs2 manifold?
Do you have any knowledge of the construction on the original Rs2 manifold?
So the Wagner manifold will not have the same heat crack error as
original Rs2 manifold.

Bruno,

the Material is GGG-NiSiCr 3552, also called D5S. The Same is used for Turbine Housings or Manifolds like 1.8T or 2.0TFSI Exhaust Manifolds. The Company, wich cast these Manifolds, is also making all the high Nickel Manifolds for AUdi and VW.

Acutally, i wouldt say its a RS2 Replika Manifold, because all Data what we used its just the Position of the Flanges. Everything else is a new Design.

[Matt_D]

i always thought that the movement of the exhaust could be made through the springs holding the cats.Also the wastegate can move due to the 'springlike' connection to the manifold

I thought that but was told otherwise in another thread a couple of months ago

The springs will allow for a bit of movement but not much, perhaps the snub mount mod would help stop engine movement and then stop the cracking of the manifold ?!?

[Jamo]

Bruno,

the Material is GGG-NiSiCr 3552, also called D5S. The Same is used for Turbine Housings or Manifolds like 1.8T or 2.0TFSI Exhaust Manifolds. The Company, wich cast these Manifolds, is also making all the high Nickel Manifolds for AUdi and VW.

Acutally, i wouldt say its a RS2 Replika Manifold, because all Data what we used its just the Position of the Flanges. Everything else is a new Design.

Hows this progressing Lupo911? Is the manifold close to release?

Thanks for the nipples for your IM

[Lupo911]

Hows this progressing Lupo911? Is the manifold close to release?

Thanks for the nipples for your IM

Yes its very close... Casting is all done, i will be in the machine Shop on Monday and work with the 5axis CNC on the Manifolds... as soon i am done i will show you some Pictures.

[Lupo911]

ok, here we go

[Jamo]

Sexy!

I take it then the T3 can be machined instead of the K26 quite easily due to larger contact surface?

How much is the final price and do we have an estimate on bhp limit?