dont understood your questio?
-
One thing i've learned we are way behind the Scandinavians! -
if you are going to use the reverse inlet manifold on your project and you dont want the plate,would you sell it to me?Comment
-
on mine intake manifold you can not deattatch the plate. also sold mine to K.alle on here, he hasnt just picked it up yet.
One thing i've learned we are way behind the Scandinavians!Comment
-
sorry! i read through what you wrote fast and missed that 'cannot detach' it.
oopsComment
-
no problems, do like im gonna do, mill in an fake logo of it
One thing i've learned we are way behind the Scandinavians!Comment
-
yup,thats what ill probably doComment
-
thats what i was going to ask, anyone on here have the facility to mill the script into a stock fanifold?
GavS2 Cabriolet.........
Comment
-
shops that are capable to make flanges and stainless steel applications,could be able to work something out. I did a little search and i have sent an email to a shop.Ill keep you posted of the responceComment
-
excellent, id be really interested to have my aan inlet done in the cab
Thanks
GavS2 Cabriolet.........
Comment
-
Audi S2 -1994 | 480 Hp 650 Nm | FlexFuel | MaxxECU | 3" Stainless | Porsche GT3 Front Brakes
http://www.garaget.org/?car=52877Comment
-
No worries
it is placed really good in the living room
One thing i've learned we are way behind the Scandinavians!Comment
-
My ABY IM with blank casting imprint, earlier ABY's didn't have this until the RS2 came along;
2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
Hallo ,guys!
I'm on my way to do something like that,but the signature will be "powered by UNIFLEX RACING"
This is my friend's tuning center and he is tuning my car
I'll show you pics ...My IM is reversed ABY one and the plate will be with 230mm height, 40mm wide and 2 or 3mm profile
It's not hard to do with laser cutting machineComment
-
I get the odd job at work which involves routing aluminium "3mm sign grade", normally powder coated.
I use Artcam to create the tool paths for all sorts af signs. Do 2D stuff like this all the time but in wood, corian and dibond and some 3D stuff.
We use two CNC table routers, 1m x1m and 2m x 2.5m, with vacuum beds and clamping.
I don't like cutting aluminium but can do it. I needs care and lubrication. Happy to give it a try if someone can give me a good image to work from and some dimensions.
How would you fix them on?
How about S2 forum Corian coasters.
I'll post a pic!
What's it worth?
DaneS2 91 (red standard)
Comment
-
S2 Forum Coaster?
He's a quick doodle.
Coasters
Corian or wood?
DaneS2 91 (red standard)Comment
Comment