Tweet
If you get some frames made like Stiggy's then you can custom sort the hole spacings. The Corbeau Forza are damned good seats for the money, more for harnesses than 3 points tho IMO.
-
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss -
Mine are just low enough, not sure if they would be ok with a Corbeau seat and Anthony's freakishly disproportionate body.
Worth a try though.Comment
-
Its true...may just buy a couple of Corbeau seats and get a frame welded up.Originally posted by stiglet View Post
Ant91' Coupe quattro 20v - project
KW V2s and other goodies
now gone
03' BMW 330CI - Sold
08' A5 Coupe 3.0l tdi quattro - Sold
57' BMW 525d M Sport TouringComment
-
There are some Golf mk.3 subframes for lower seat position, they have the front bar cut and welded lower.Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Right, got a pair of mk.3 Golf subframes to try and test fit of the driver's side one shows that it fits just fine
looks to be about 10mm higher but Recaro also do a reduced height mk.3 subframe. All good since the coupe/80/90 subframe went NLA!
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Suh..weeeet
Good job andy, defo worth bearing in mind!Black B3 1990 CQ 2.3E converted to ABY & 6spd. (301bhp) - Now Sold
03 Dolphin B6 S4 Avant LPG - New Daily Wagon
01 Silver D2 A8 3.7 quattro sport - SOLD
"Difficult is worth doing"Comment
-
Looks like Wiechers Sport do frames for the typ89, B4 etc.
http://www.wiechers-sport.de/index.p...=54&Itemid=131Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Comment