Nice one, I was gonna use a 90 Swagelok stainless elbow with some 1/4" stainless tubing to put the silicon hose to...
Announcement
Collapse
No announcement yet.
K24R OEM Style Boost Gauge
Collapse
X
-
-
Andy:
I'm correct in assuming that I can just exchange my PSI VDO boost gauge to yours in regards to the hose connection?
Comment
-
For the record these gauges CAN be installed in the centre vents WITHOUT cutting the air flap and with retaining its functionality.
Putting a 90 deg elbow keeps the hose out of the way but also the bulb and bulb holder gets in the way of the flap operating.
But if you replace the bulb with LEDs which are totally inside the gauge the flap will (just) miss the back of the gauge body. Bit of mucking around and the light spread can be a bit uneven from the LEDs but I also made mine red so the light matched the centre buttons. .. Will have to change them to white now so it works with the oem face.
Alternatively you could find a smaller bulb which fits totally inside the gauge.
Comment
-
Originally posted by Rusty View PostYes. They should all be the same fitting.
Is it a cockpit series (side lit) or vision series (back lit)?
Comment
-
Originally posted by Rusty View PostHi all, if there's demand for a second batch then pop your name on the list below. I got loads of faces made up to do a batch or two more.
- boghopper
- renoks
- josh,s ABY S2 - S2 Bar +/-
DAVID
jon441cc - RS2 Bar +/- Face only
@ mouse, thanks for your patience, it will be posted first thing tomorrow for you
will have the rs2 white face if price is rightLast edited by Rusty; 3 October 2010, 12:34.[SIGPIC][SIGPIC]/SIGPIC]92 3B pearl white=gone back home to Germany,probably in bits and pieces
RS2 VOLCANO BLACK] soon to be broken to bits
Comment
-
Received, fitted and super happy.....
Thanks for sorting out a great group buy Andy...
ChrisHonda CBR 1100XX Blackbird Turbo....undergoing major changes.....
S2 Coupe... bit easier off the line...
'03 ZX12-R daily hack.... lots of nice bolt ons...
Comment
Comment