Announcement

Collapse
No announcement yet.

Complete sets of rubber bushings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Complete sets of rubber bushings

    Is there a demand on complete sets of all bushings and rubber mounts for audi s2 ?
    All rubber but much stiffer then original. They flex but just little ,, and they dont squeek like delrin. I wonder for like group buy. If there is a interest then it would be possible. I have med for bmw e30 ,, the rear axel ,,700hk , worked fine ,, have pictures on the e30 bushing i did good quality.

  • #2
    Is there a site where i can buy a complete set of bushings to hole car ,, coupe and avant ?
    Not shore what the difference is between coupe and avant.

    Comment


    • #3
      Originally posted by S2_avant 19930325 View Post
      Is there a site where i can buy a complete set of bushings to hole car ,, coupe and avant ?
      Not shore what the difference is between coupe and avant.
      Verkline. Coupe has different set up at rear to Avant.
      Nothelle S2 Avant
      Black Ur project
      Ocianic Ur project gone
      S2 Coupe project gone
      Urs6 plus project gone

      Comment


      • #4
        Sorry ,, my bad .. i ment .. complete set of original bushings for s2 avant ?

        Comment


        • #5
          Audi will probably happily supply you.

          Comment


          • #6
            Originally posted by S2_avant 19930325 View Post
            Sorry ,, my bad .. i ment .. complete set of original bushings for s2 avant ?
            I couldn't find a full set when I did mine. You may be lucky and find some new old stock somewhere.
            Nothelle S2 Avant
            Black Ur project
            Ocianic Ur project gone
            S2 Coupe project gone
            Urs6 plus project gone

            Comment


            • #7
              Is there a list on all bushings for the car with oem numbers? Dont want to miss anything if i order.
              Audi s2 avant - 93

              Best Regards

              Comment


              • #8
                You need to use 7 Zap and look them all up.
                Nothelle S2 Avant
                Black Ur project
                Ocianic Ur project gone
                S2 Coupe project gone
                Urs6 plus project gone

                Comment


                • #9
                  I would think twice before going "back" to OEM rubber bushings for the subframes. Unless you (or your shop) are especially proficient with a press to get the new ones in. I had a shop destroy 2 bushings using a standard press. I imagine Audi had a custom rig to get the originals in undamaged. I ended up using aluminum bushings. I honestly don't know of anyone who has replaced the subframe with original 1-piece bushings.

                  Comment


                  • #10
                    Hmmmm .interesting ,,, they must have a press ,, nothing strange ,, it must be a special tool that you use between the press and the bushing.
                    I will take pictures/movie when i do it.

                    Comment


                    • #11
                      Found out about what kind of tool you need. Check.

                      The bushings i cant find is 8A0505145C 4 pieces for the rear axel.

                      ( There is 8A0505145D and 8A0505145E ,, 2 pieces each in ETKA but the dont fit my car , when i check against the chassinumber )

                      Any tips ? Does anybody have used ones ? Can pay for them and shippingcost , will make new one i cant find.

                      Best Regards



                      Comment


                      • #12
                        8A0505145C - Verkline do them.
                        I just bought the whole Verkline kit then you have everything.
                        Nothelle S2 Avant
                        Black Ur project
                        Ocianic Ur project gone
                        S2 Coupe project gone
                        Urs6 plus project gone

                        Comment


                        • #13
                          But i want rubber, not Polyurethane

                          Comment


                          • #14
                            I dont like the squeeking sound in the car , but i dont know which bushings squeek ,,

                            Comment


                            • #15
                              Originally posted by S2_avant 19930325 View Post
                              I dont like the squeeking sound in the car , but i dont know which bushings squeek ,,
                              I don't have any squeak. You are going to struggle to find OE rubber.
                              Nothelle S2 Avant
                              Black Ur project
                              Ocianic Ur project gone
                              S2 Coupe project gone
                              Urs6 plus project gone

                              Comment

                              Working...
                              X