Complete sets of rubber bushings

[S2_avant 19930325]

Is there a demand on complete sets of all bushings and rubber mounts for audi s2 ?
All rubber but much stiffer then original. They flex but just little ,, and they dont squeek like delrin. I wonder for like group buy. If there is a interest then it would be possible. I have med for bmw e30 ,, the rear axel ,,700hk , worked fine ,, have pictures on the e30 bushing i did good quality.

[S2_avant 19930325]

Is there a site where i can buy a complete set of bushings to hole car ,, coupe and avant ?
Not shore what the difference is between coupe and avant.

[Tractor Dave]

Is there a site where i can buy a complete set of bushings to hole car ,, coupe and avant ?
Not shore what the difference is between coupe and avant.

Verkline. Coupe has different set up at rear to Avant.

[S2_avant 19930325]

Sorry ,, my bad .. i ment .. complete set of original bushings for s2 avant ?

[Bowie69]

Audi will probably happily supply you.

[Tractor Dave]

Sorry ,, my bad .. i ment .. complete set of original bushings for s2 avant ?

I couldn't find a full set when I did mine. You may be lucky and find some new old stock somewhere.

[S2_avant 19930325]

Is there a list on all bushings for the car with oem numbers? Dont want to miss anything if i order.
Audi s2 avant - 93

Best Regards

[Tractor Dave]

You need to use 7 Zap and look them all up.

[nribs]

I would think twice before going "back" to OEM rubber bushings for the subframes. Unless you (or your shop) are especially proficient with a press to get the new ones in. I had a shop destroy 2 bushings using a standard press. I imagine Audi had a custom rig to get the originals in undamaged. I ended up using aluminum bushings. I honestly don't know of anyone who has replaced the subframe with original 1-piece bushings.

[S2_avant 19930325]

Hmmmm .interesting ,,, they must have a press ,, nothing strange ,, it must be a special tool that you use between the press and the bushing.
I will take pictures/movie when i do it.

[S2_avant 19930325]

Found out about what kind of tool you need. Check.

The bushings i cant find is 8A0505145C 4 pieces for the rear axel.

( There is 8A0505145D and 8A0505145E ,, 2 pieces each in ETKA but the dont fit my car , when i check against the chassinumber )

Any tips ? Does anybody have used ones ? Can pay for them and shippingcost , will make new one i cant find.

Best Regards

[Tractor Dave]

8A0505145C - Verkline do them.
I just bought the whole Verkline kit then you have everything.

[S2_avant 19930325]

But i want rubber, not Polyurethane

[S2_avant 19930325]

I dont like the squeeking sound in the car , but i dont know which bushings squeek ,,

[Tractor Dave]

I dont like the squeeking sound in the car , but i dont know which bushings squeek ,,

I don't have any squeak. You are going to struggle to find OE rubber.