Clutch release / throw out bearing

[Rusty]

As above, I think I'll follow Alex and get an INA one from Helix.

[A80Avant]

If I use the above link is that the correct part for our car? I'd like to buy one as well. Maybe 2


Edit. Just placed the order myself. Let's see if these are the in between solution from the plastic and the metal ones.

[Rusty]

Just checking back in with this before I order. I want a release bearing and FW centre bearing too.

Any news, Alex?

[Error404]

Rattles like a bitch after 2k miles against an SRE pressure plate

[Rusty]

Hmmmm....

Whaat's the plant then? Stock Sachs one and put up with is disintegrating?

[SteveH]

If your using a 3B/7A flywheel just get used to the rattle at idle! I've had it on numerous clutch/bearing combos. I'm about to remove my gearbox after 5000 miles with the SRE clutch kit installed. I will report back on condition of the Sachs bearing and friction material.

[Error404]

AndyP said his OEM one was holding up well, I think I will try that next time. Otherwise I'll maybe look at a hydraulic solution.

[AndyP]

I think I'm on my 3rd now, stock, SRE and Helix and they all rattle at idle

[Error404]

oh

[AndyP]

Just get a louder exhaust!!

[Rusty]

What's the thought then? Can the Sachs item hold up to the punishment?

[Error404]

I think I'm going to try and work out a hydraulic solution

[andy10v]

I think I'm going to try and work out a hydraulic solution

Tilton?



Pat D went hydraulic as well

http://www.s2forum.com/forum/showthread.php?t=61959

[Error404]

Ah ha. So the Saab pattern ones do fit the 3 bolt holes for the guide sleeve? I was wondering this today. Anymore info on that install mate?

[Error404]

I am retarded. Just hit your link