New S2 Avant Nothelle N300 owner

[newsh]

Thanks John. Is your Avant still being worked on/up? Pics of the underside, rear subframe would be useful right now!

I just picked it up, all finished!

[Tractor Dave]

Never mind. Any pics? Can't wait to see it!

[newsh]

Never mind. Any pics? Can't wait to see it!

Picking up some fresh V Power

[Tractor Dave]

Very nice

[rxl]

its the heatshield for the fuel lines in the engine room
9e0424dd2c477c478174bcd8cf78b94f.jpg0b7315ecc6ecd9d6839d31fdb6506022.jpg

[Tractor Dave]

That's what I need. Audi tradition don't seem to have it. Looks complex to make! I don't even have the old one to copy.

[rxl]

i dont know how mutch coupe and avant differ but maby with small modifications you can fit it.

[Tractor Dave]

i dont know how mutch coupe and avant differ but maby with small modifications you can fit it.

Thanks for your pictures. I think Trist has one spare.


Sent from my iPhone using Tapatalk

[Tractor Dave]

Fitted the vac pump for the dif lock and the ABS ecu.
Also new Abs sensors both sides at the back and new handbrake cables.



Also re fitted the wheel arch liners


Anything rusty replaced with stainless steel



Sent from my iPhone using Tapatalk

[M2ki]

It is the diff lock control unit, not a pump, it just switches vacuum to lock and unlokc diff.
ABS ecu is in the boot on avant.
Whats that grey box to the right? Looks like a cruise control module. If so, why is it mounted there, dashboard with airbag?

[Tractor Dave]

It is the diff lock control unit, not a pump, it just switches vacuum to lock and unlokc diff.
ABS ecu is in the boot on avant.
Whats that grey box to the right? Looks like a cruise control module. If so, why is it mounted there, dashboard with airbag?

I assumed it was the pump. My error.
Don't know why the grey box is there. No airbags.

[M2ki]

Wiring colours seems to match cruise control module. I thought it was mounted behind the dash on all B3/B4 models.

[Tractor Dave]

Things are starting to come together!

Started the rear subframe.


Alberts bushes all seem to fit very nicely.

Has anyone else used them on the rear subframe? Just wondering if the torque settings are the same for the rear wishbones to subframe?



Sent from my iPhone using Tapatalk

[Rikki Kitto]

MMMmmmmm nice

[Tractor Dave]

Thanks to Trist I have some of the missing heat shields!




Given a good scrubbing


Then the steel ones were given a quick going over with the wire wheel.
Then a coat of rust converter.


I will paint them tomorrow


Sent from my iPhone using Tapatalk