(steel ) crankshaft sprocket

[my2000apb]

yes they are still available do you want standard size or for wider belt ? i can ship to USA .

not sure, i have a us spec 3b from a 200 20v

[volcano rs]

not sure, i have a us spec 3b from a 200 20v

thats just standard size. i should have them end of the week

[volcano rs]

Got any pictures of the wide belt one Jamil?

same as standard just around 4mm wider thats all. i,ll post a pic tomorrow.

[my2000apb]

thats just standard size. i should have them end of the week

cool let me knwo when they are availible

[volcano rs]

cool let me knwo when they are availible

will do

[volcano rs]

Got any pictures of the wide belt one Jamil?

here is a pic of the two types of sprockets.
i also have 6 more standard size sprockets in stock now.

[volcano rs]

due to people asking for these i have 4 sprockets available.

[UrS4boy]

Hey Jamil, I assume the 25mm is for the RS2 width belt? Si

Since when was the RS2 cam belt wider than the AAN or ABY cam belts?

Here is a photo by somebody here of AAN (top), 3B (middle) and RS2 (bottom) cam belts. Look the same width to me.

[volcano rs]

Since when was the RS2 cam belt wider than the AAN or ABY cam belts?

Here is a photo by somebody here of AAN (top), 3B (middle) and RS2 (bottom) cam belts. Look the same width to me.

can you see any where i said the belt is wider ?.
i had some sprockets made wider in case people want to use a wider belt of some sort which i'm going to use on my stroker project for strength. get your facts right !

[UrS4boy]

can you see any where i said the belt is wider ?.
i had some sprockets made wider in case people want to use a wider belt of some sort which i'm going to use on my stroker project for strength. get your facts right !

And did you see that I DID NOT quote *you* in my question but someone else ( HPmuirt) ?

Learn to read.

[porkkis]

The wide belt is used in VW 16v and early 1.8T 20v engines. The 16v cam wheel can be used in I5-20v but it does not fit under the timing belt cover. The tooth profile is the same.

Also tall block 5cyl diesel and 2.5 petrol engines use the wider belt but with different tooth profile (more square like in the old 5cyl audi).

Can't remember just now what water pump should be used in I5-20v with the wide belt. Anyone?

Actually I think 3B water pump has wide enough pulley to handle the wide belt.

[volcano rs]

The wide belt is used in VW 16v and early 1.8T 20v engines. The 16v cam wheel can be used in I5-20v but it does not fit under the timing belt cover. The tooth profile is the same.

Also tall block 5cyl diesel and 2.5 petrol engines use the wider belt but with different tooth profile (more square like in the old 5cyl audi).

Can't remember just now what water pump should be used in I5-20v with the wide belt. Anyone?

Actually I think 3B water pump has wide enough pulley to handle the wide belt.

thanks for the info porkiss

[my2000apb]

do you have any of the wider ones in stock

[volcano rs]

do you have any of the wider ones in stock

i might have one i'll check for you later .

[my2000apb]

thanks this will be perfect for my 16 valve stroker project