My s2 avant STEP 1

[AndersS2]

Sure, what do you want to see Pete? Its fairly standard from outside besides the EM, turbo, wg, IM, coils and breather system. I will try to get some more pics when I get back in the garage tomorrow. Now I have a date with the sofa, getting rid of all the alcohol from yesterday.

[AndyP]

Also got my high quality "turbo by garrett" turbo blanket, which will fit perfectly in the enginebay:


Blanket turboed:

I need one of these, where did you get it from and how much?

[A80Avant]

why would you need a blanket?

[fridtjov-audirs2]

Looking nice

I make extension sets available for the connectors to on my MTM rs2 so could rever it, not easy to find any conector that fits tps so need to make one, have no picture her.

[AndersS2]

250$ australian dollars from here: http://www.horsepowerinabox.com/HPIAB2/index.html
It costs less without text.

[AndersS2]

Looking nice

I make extension sets available for the connectors to on my MTM rs2 so could rever it, not easy to find any conector that fits tps so need to make one, have no picture her.

Fantastic! where did you buy the connectors and wires? Can you also get the connectors in diffrent colours (green, grey, brown) to match the loom?

[fridtjov-audirs2]

I dont get new, I have som old that I use

[Jamo]

I need one of these, where did you get it from and how much?

you can get them in the U.K a lot of places such as Own Developments and AET sell them.

I want one as well but not really a priority at present

[mcandmar]

I dont remeber where all the wire/connectors go, so I need some help here. The connector which is on the injectors net', does that hook up with the hallsender connector as in this pic?:

Yes thats the hall sender connector.

I got a new watermanifold sensor aswell, but this one got 1 connector pin, and the other (old) seen hanging in my hands have to connectors. Are they still available new as two pin connected or am I mixing?:

Looks like a low oil pressure switch, whats the part number on it?

[AndyP]

why would you need a blanket?

Not using an airbox so I'm looking at all options for keeping heat down in the engine bay.

I've seen the one from Owen, just wondered if this one might be cheaper but it's not.

[Jamo]

They aren't cheap best option is zircotec ceramic coating

[A80Avant]

i see.
well so far my setup is not giving me any higher inlet temps.Usually a couple of degrees lower than ambient with normal driving (ie: 21 outside usually gives me 18 inside. Pretty nice!)

[terrybullwon]

I have a few spare connectors if you still need them?

[AndersS2]

Yes thats the hall sender connector.

Looks like a low oil pressure switch, whats the part number on it?

Thank you for replying on my questions

Indeed it may be a oil pressure switch, as the one that sits on the oil PS place is the old water sensor, but, the odd thing is that the loom does not seem right that way. The length of the cables and their 'natural' bends to connect on the actual sensor seem most right as the way I have connected it. It will be much more clear when I get a decent photo up.
Also there is no pnr found on the belived oil pressure switch.

Is the white hooded female supposed to go on the water rail sensor? If yes then it pretty much sums it up.

I have a few spare connectors if you still need them?

Yes please!!! How many male and females do you have? Also got the TPS huge male and female connector?

cheers,

[mcandmar]

Is the white hooded female supposed to go on the water rail sensor? If yes then it pretty much sums it up.

Nope, the little white condom thing with the single wire is the oil pressure switch on the block. Water sensor has two spade connectors with black rubber boots from memory.