My Ocianic Blue Ur restoration

[Tractor Dave]

Great and 16.1 ohms is correct resistance?

Apparently it's in range.


Sent from my iPhone using Tapatalk

[Tractor Dave]

So I made a little heat shield for the chassis leg next to the down pipe. There was nothing there before.


And I fitted a new adjuster for the alternator. The old one wasn't very well.


And the airbox bottom got a scrub before it was fitted. Stainless bolt and washers where possible.


Tomorrow I'm going to try and sort the ends of the fuel pipes that are currently just sticking up in the air under the bonnet. Worried grin.


Sent from my iPhone using Tapatalk

[B5NUT]

Coming together Dave. Looking forward to the end result.

[4WDrifter]

This is a proper restoration!! I’m amazed at all the heat shields especially your extra ones. I’m noting them all as I fear mine are lost.

[Tractor Dave]

This is a proper restoration!! I’m amazed at all the heat shields especially your extra ones. I’m noting them all as I fear mine are lost.

Thanks. I do still have some of my old heat shields if you need templates

[newsh]

Worth checking the throttle body switch wire colours against the wiring diagram, they need to be the right way round or it will ping like a church bell. Also there's a confusing extra plug by the bulkhead (at least there is on mine), use it by mistake for the enrichment valve and the full throttle enrichment doesn't work (more pinging!).

[Tractor Dave]

Worth checking the throttle body switch wire colours against the wiring diagram, they need to be the right way round or it will ping like a church bell. Also there's a confusing extra plug by the bulkhead (at least there is on mine), use it by mistake for the enrichment valve and the full throttle enrichment doesn't work (more pinging!).

Cheers for the heads up. Everything was labelled there before I took apart but I will double check.
Where is the wiring diagram. You probably already sent me one

[newsh]

Cheers for the heads up. Everything was labelled there before I took apart but I will double check.
Where is the wiring diagram. You probably already sent me one

Idle switch should be blue/brown and blue/yellow.
What year is your car?
I have original paper diagrams for the first few years with English notation, there are also diagrams on Phil’s site if you can get by in German.

http://www.sealtd.net/quattro/ishamresearch/quattro/wiring/Typ85/index.html

[Tractor Dave]

It's 1986

[psiconauta911]

Dave you are an inspiration!

Quattro quattros in quattro years you keep a bunch of us happly drooling!

[newsh]

It's 1986

I'll scan you some ?

[Tractor Dave]

I'll scan you some ?

[4WDrifter]

Thanks. I do still have some of my old heat shields if you need templates

Thanks, when I get mine back from the welders I might take you up on the offer.

[Tractor Dave]

Injectors getting a clean. Seals are very hard.


All came off no issues.


Given a scrub.




And soak.



I need to rig up a little tester. Thinking cap on.

Hoses got a scrub inside and out.



Sent from my iPhone using Tapatalk

[GT500]

Make sure you clean the the piston in the injection distributor. They stick after being stood awhile.