Pearl white coupe revival

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ottawa coupe
    S2Forum Maniac
    • Nov 2004
    • 868
    • Country: Canada

    #706
    I think that was a 4.0t, hot v engine. The one i am sorta thinkin bout getting is a generation or 2 older. If i am not mistaken, it's the same belt drive 077 block i have currently so less integration work, just plumbing.

    Seller is gonna send me pics of the engine bay "when he gets a chance". If it looks like the engine was hit, big fat nope on my part.
    1993 UrS4...aka the rocket powered living room

    Comment

    • ottawa coupe
      S2Forum Maniac
      • Nov 2004
      • 868
      • Country: Canada

      #707
      Well, not much happening other than me cleaning stuff up in the shop. As i was cleaning bits, i came across all the cabriolet airbox guides. Decided to take a closer look at all of that stuff and how to make it fit the changes i have made. As is the norm on this project, i was fine till i put the radiator in lol.

      20261110_105307.jpg 20261110_105301.jpg

      I am very seriously considering a bambu h2s this fall so this could very well be a solvable problem. I had a cheap printer a few years back and got maybe 3 things out of it with MANY failures. From what i can tell from people's feedback is it seems that the bambu is a proper tool instead of a gadget and just.....works.

      I also want to revise the tube that goes between the area behind the light to the airbox. On the v6, it's TINY.
      1993 UrS4...aka the rocket powered living room

      Comment

      • ottawa coupe
        S2Forum Maniac
        • Nov 2004
        • 868
        • Country: Canada

        #708
        So, my credit card chickened out on the h2, went for the bambu p2s. Holy crap i love it when technology just friggin WORKS. Threw a part at it that after 3 attempts i got my ender to actually make. The first layer it put down was better than ANY layer the ender EVER put down.....

        Game changer.
        1993 UrS4...aka the rocket powered living room

        Comment

        • ottawa coupe
          S2Forum Maniac
          • Nov 2004
          • 868
          • Country: Canada

          #709
          So, these popped up on marketplace last night. Had to buy them impulsively. But i KNEW they'd look better than b5 Avus wheels! C5 s6 fat fives...

          20261114_160236.jpg
          1993 UrS4...aka the rocket powered living room

          Comment

          • RedV6
            S2Forum Fanatic
            • Jun 2026
            • 84
            • Country: Scotland

            #710
            Yea. They definitely suit the Coupe, good call.

            Comment

            • ottawa coupe
              S2Forum Maniac
              • Nov 2004
              • 868
              • Country: Canada

              #711
              I'll hafta get a proper setup for such a large area but the wheels polished up quite well on a little test patch i did. Bodywork should start progressing next week. I've been busy with the printer making bits. One thing i have done is make adapters for the 17z calipers. I'll get hardware tomorrow so that should at least confirm they'll work. I swapped the fittings around on them too so they are now trailing, not leading. Should the trial fit work, i'll dust off the mill and get it going again and make them in metal. Should have a tasty pic tomorrow.

              edit: so yeah, once again living in the 1 horse town that is ottawa bites me. Apparently, m12 fine thread countersunk head bolts are just too damned exotic..... so my visa just soaked to buy this crap online.... sigh. No pics for a bit as a result. Although i am very confident it'll all work. Gonna go ahead and get some metal.
              Last edited by ottawa coupe; Yesterday, 14:42.
              1993 UrS4...aka the rocket powered living room

              Comment

              • struikie
                S2Forum Addict
                • May 2019
                • 317
                • Country: Netherlands

                #712
                One of the reasons that Verkline stopped selling the 17Z and 18Z adapters is that they
                couldn't source the countersunk bolts any more. And also they don't want to be accountable
                for brake parts...
                I got the very last set of 18Z adapters they made.

                JW
                | project | 1993 Audi 80 VR6 turbo quattro |
                | daily | 2018 BMW G31 530d | 345bhp 770Nm |

                Comment

                • ottawa coupe
                  S2Forum Maniac
                  • Nov 2004
                  • 868
                  • Country: Canada

                  #713
                  Insane that bolts are now "difficult to source". I ordered some at over $6 a piece.... they get here next friggin week. The world is broken lol....

                  At any rate, decide to give a wheel a quick test polish. I think i'll need a deeper cutting compound though as there are little black specs when you look up close. But nothing some elbow grease won't sort.

                  20261117_161535.jpg
                  1993 UrS4...aka the rocket powered living room

                  Comment

                  • ottawa coupe
                    S2Forum Maniac
                    • Nov 2004
                    • 868
                    • Country: Canada

                    #714
                    Ok, gonna go ahead and be a fanboy for a second. If you're thinkin bout getting a bambu printer, just do it. I've hemmed n hawed about it for a year. This thing just....works.

                    First attempt at the intake tube as the kludged together one made from cutting down the oe pipe resulted in a large leak between maf and throttle. Spent all of 20mins drawing it to see if i could at least get in the ballpark. Some tweaking to do in the future (i think i only used 4 cross sections) but it'll definetly be easily done now.


                    20261117_173635.jpg
                    1993 UrS4...aka the rocket powered living room

                    Comment

                    • ottawa coupe
                      S2Forum Maniac
                      • Nov 2004
                      • 868
                      • Country: Canada

                      #715
                      Holy crap, you weren't kidding about the bolts. I had to get them outta the states so they were expensive to begin with. I just got the bill for import tariffs.

                      In the end i am paying $275 to get 16 friggin bolts.

                      The world has gone mad.

                      What's stupid is i bet the bolts were made in china to begin with....
                      1993 UrS4...aka the rocket powered living room

                      Comment

                      • RedV6
                        S2Forum Fanatic
                        • Jun 2026
                        • 84
                        • Country: Scotland

                        #716
                        Blame ALL the Government's of UK, Europe and North America over the last 30 years for selling their manufacturing souls in the name of "making things cheaper for their population" and "choice"
                        Sadly I don't think it will ever come back. Our choice is now Chinese......!

                        Comment

                        Working...