sport quattro replica

[Error404]

Nice job on the gearbox rebuild Zlobo
Where did you find the replacement bearings, I can only source them from the dealer

I am making a diff oil cooler set-up for my rear Torsen diff using parts from a 200sx - it has a mini cooler and pump that work nicely and cheaply.
I will activate the pump using a thermo switch on oil temp. The diff housing will need to be modified to fit the oil line take-off. I'll use the filler plug to return into

[Jamo]

Zlobo what turbo did you have and what spec? what have you gone to now? what was your back pressure reading is you know it?

[zlobo]

Nice job on the gearbox rebuild Zlobo
Where did you find the replacement bearings, I can only source them from the dealer

I am making a diff oil cooler set-up for my rear Torsen diff using parts from a 200sx - it has a mini cooler and pump that work nicely and cheaply.
I will activate the pump using a thermo switch on oil temp. The diff housing will need to be modified to fit the oil line take-off. I'll use the filler plug to return into

My local SKF dealer found them it's half the price then geting them at the audi dealer.
the skf part number are writen on them.
cool keep me posted on how you fited them..

[zlobo]

Zlobo what turbo did you have and what spec? what have you gone to now? what was your back pressure reading is you know it?

my old turbo spec is an billet race compturbo with triple x cheramic ball bearing.
it was an ct4B6067 with ar .62 on the hot side so i had a huge back pressure.
I think when i boosted 1,5bar i had 2bar of bacpressure, con the compressor outlet i had 175C after ic we had 30-43C
So i swaped it with a friend so now i got a ct6767 and ar ,81 on the hotside.

[vcosmin]

How is backpressure with new housing ?

[zlobo]

How is backpressure with new housing ?

did not have the chanse or time to check the new backpressure,
if i get the time before the snow i can mejur it else it have to be on the rototest.

[Jamo]

Thanks for the update

[Bram]

nice write up of the gearbox fix

[jevrem]

Zlobo great job for the gearbox

[zlobo]

Seams like i didn't make a post since i was in houston texas in november last year.

When my quattro started to twist and snap shafts and joints.
I decided to order biger shafts.


blasted them with 2k paint


like this the quattro was standing since Januari. when i dismountet it for rebuild


this is what happens afer a while when you brake some joints and shafts.


also started to plan of upgrading the rear disks from 10 x 245mm to 22 x 300mm,


in februari the quattro was found in a finish car magazin







sand blasted and painted them i also machined them so i culd fit front bearings in them.


checked out the chenerator, replaced the bearings etc..



3 days ago i got my hubs back, we did som adusting on the ofset. basicaly i took the front hubs and puted them in the rear with the front joins and front bearings.


mounted them with the shafts..




rear diff cover sand blasted,


fjew weeks ago i got a box from 034


2 days ago my friend Micke @ BSR told me we are going to run youre car on the roto test tomorrow...
So i basicaly had to put everything together asp. i had to put in the new turbo shafts intercooler etc.
then mick helped me out adjusting my cam shafts, seams like they was a bit off.
In a hurry i replaced oil and oilfilter, fuelfilter, sparkplugs.
And then i drove the quattro 5km to bsr and then we hooked it up on the roto test.

after fjew h we ended up with 630 whp, and 596WNm
last year i had 509WHp at 1,6-1,7 bar of boost now i got that figure at 1,3bar.
we stoped at 630whp due to miss fiering seams like i need to find beter coils. by replacing the coils and dailing in the cams a litle more Micke thinks we can add up to 50 more whp

[Jeffer]

nice nice nice nice!

[Jeffer]

Where did you buy those shafts? Need some shafts asap.

[zlobo]

thanks Jeffry, cp-service.se have fixit shafts i am runing o dione i bougth mine on a group buy,

[zlobo]

http://www.youtube.com/watch?v=uV4_kyX1M24

[Ian Simmonds]

That's a lovely lazy flame love that.

Both of our type 85's 'burp' lazy flames, I just hope they look half as good as that....