Audi S4 small drag project

[bdcoombs]

great choice.. i have one for my coupe build as well.

i really like the precision billet wheels.. even journal bearing they spool great.. i have the 60mm on my a4, a 62 on my gti , and now the 67 for the coupe

[vcosmin]

Well i have a compturbo billet, dont know if is better or worst than pte, but i will make a comparation with gtk 65mm cast vs 67billet.

Sent from my GT-I9000 using Tapatalk

[vcosmin]

http://www.youtube.com/watch?v=ITYxzuBIc0Y

http://www.youtube.com/watch?v=RY0D4iV-N3c

Been to KOE lost in semifinals by 0.028 sec

[quattro84]

Nice sound, you seem to suffer from wheelspin on the rear left?

[vcosmin]

all the difs are open. still i got 1.6 , 1.7 ,60ft , street tyre and 17rims.

Sent from my GT-I9000 using Tapatalk

[vcosmin]

http://www.youtube.com/watch?v=8UfNQqpXeiU - S3 2.0 tfsi (has a record of 2.8 to 60mph)

http://www.youtube.com/watch?v=iMDoERdOr7Q - gt37 vr6 12v, wate/air intercooler

http://www.youtube.com/watch?v=Sya4sHBtP84 - stage 3 RS6 Biturbo lambo engine.

[Topolini]

Stronger Driveshafts, and i changed the injectors, from low imp, to high imp Bosch Ev14 - 10x870cc@3bar.

Hello!
Maybe my question seems strange, but I would like to clarify. Cut the drive shaft in the future was welded and installed on the machine?
Its geometry during welding was a curve. Or is there a way to avoid distortion after welding?

[vcosmin]

Hello!
Maybe my question seems strange, but I would like to clarify. Cut the drive shaft in the future was welded and installed on the machine?
Its geometry during welding was a curve. Or is there a way to avoid distortion after welding?

No, the driveshaft were made from 0 , custom. The one welded was only used for dimensions.

[vcosmin]

New turbo

[Biturbo]

nice,where you bay?That price?

[vcosmin]

New setting for turbo, ct 43 67/79 1.5 bar @ 7500 680hp, same or better spool up than gtk, over 100hp gain at same boost, larger turbine, larger ar.

[Costash]

You need to make a small video with your new turbo setup in action on a drag strip!

[Bram]

CT turbos seem to be popular still it seems

[vcosmin]

new P.B. 10.4 @ 230 kmh trap speed, 1.69 60ft (street tyre, and cold concrete).
For the next year the plans are high 9's

[vcosmin]

http://www.youtube.com/watch?v=GGOaW4xWD7Y