My 95 S2 Avant Project. LZ5T Coolness

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • irishs2
    replied
    Ok, trying again to get back into the swing of things.
    Just a few little jobs to get started. I decided to reattach the sill covers and trim.











    The black clips are the usual RS4 ones to replace the NLA S2 ones.


    Sorry about the poor pics, will have my usual camera back next time.


    I also had occasion to see the rear of the car in sunshine. Getting quite excited



    I also decided to fit the flywheel and clutch. New bolts for the flywheel and refurbished bolts for the pressure plate. Next up is reattach the gearbox and offer it up to the car.
    Last edited by irishs2; 11 July 2017, 20:43.

    Leave a comment:


  • Gimmi
    replied
    Aah now i see! Ill fix that bloody thing tomorow, so anoying. Thanks!!

    Leave a comment:


  • irishs2
    replied


    I replaced the "cushion" spring on the handle with a small nut (acting as a washer) and tightened the screw . That is all I did.

    hope that helps.
    Last edited by irishs2; 11 July 2017, 20:42.

    Leave a comment:


  • Gimmi
    replied
    My car is a 1993. Not sure about wich month, but can find it out if its interesting. But i dont got a sunroof either.
    I got a mid 1994 audi 80 avant to, with sunroof. Im gonna check where it is there.

    Just replyed this last ninja edit from last post, if you missed it hehe

    Originally posted by Gimmi

    Edit:

    What did you do to the handle to fit the 3B light panel? Ive mounting this panel on my audi 80 tdi avant to, and tryed to get it thighted up, but still its a bit to much play. How did you fix this?
    I should put a thread up here on my car to, the knowledge in here its pretty high! Gonna take me time to do it very soon

    Leave a comment:


  • irishs2
    replied
    Thanks very much. and good point about the battery, That looks quite the shocker. .

    What is interesting is that your roof drain is over that vent where mine was inside the wheel arch under the arch liner.
    Discussed here http://www.s2forum.com/forum/showthread.php?t=70931

    What year is your avant? I am curious when Audi made the change.

    Leave a comment:


  • Gimmi
    replied
    Just readed thrue all 30 pages, and all this stuff you have done, its amazing! Really love the attention to detail, and all the small parts. Youre doing it exactly the way i wanna do it, but im a bit more laid back, hard to get started! And btw, all these rust pictures inn the begining, makes me feel happy about my s2 avant, hehe.

    When you put the battery in again, remebere to put the hose frome the battery vent to outside the car (Along with the roof vent hose). On mine it have been taked off, and sometime the battery have toped off... And heres how it gonna look like then!


    Anyways, i have subscribed. Cant wait for next update!

    Edit:

    What did you do to the handle to fit the 3B light panel? Ive mounting this panel on my audi 80 tdi avant to, and tryed to get it thighted up, but still its a bit to much play. How did you fix this?
    Last edited by Gimmi; 5 January 2015, 00:14.

    Leave a comment:


  • Error404
    replied
    No that was The Mad Mutt aka Mr Dremel

    Leave a comment:


  • david1980
    replied
    Originally posted by Error404
    So am I, 5 years later
    That was probably from grinder injuries

    Leave a comment:


  • Error404
    replied
    So am I, 5 years later

    Leave a comment:


  • irishs2
    replied
    You know, I was looking through those old photos trying to find one that might do the trick for Dave , and just had that bad 'rust' feeling come back . So the scars are healed but I am still a bit tender

    Leave a comment:


  • Error404
    replied
    I bet you'd forgotten about the rust you've resolved by now Eric? Or are those scars slow to heal?

    Leave a comment:


  • UrS4boy
    replied
    Thanks for the follow-up Eric. I am cross posting your answer in my Sunroof drain post.

    Leave a comment:


  • irishs2
    replied


    Thats the filler cap drain.

    The sunroof drain is on the right , if we had bladerunner technology we could rotate the point of view inside the arch
    Attached Files

    Leave a comment:


  • UrS4boy
    replied
    Originally posted by irishs2
    Might not do you much good. As far as I remember the rear drain is inside the rear wheel arch. Which at this moment in time is covered by the liner.
    Thanks Eric. ("Eric the Mad")

    It looks like a hose just behind the rear tyre. No?

    Leave a comment:


  • irishs2
    replied
    Thanks.

    I managed to pick up a bose amp (attached) too. Inside they have exactly the same audio amplifier ICs. Apart from the bose having the two front channels, they seem very similar inside.
    Attached Files

    Leave a comment:

Working...