My 3B to RS2 project

[andy10v]

Is this just to get it going again temporarily?

[newsh]

Is this just to get it going again temporarily?

Yes, I'm getting set up for remote mapping

[newsh]

ATD
Quite pleased with myself here, sometimes it's the small things..

[AndyP]

What temp sensor did you use in the end?

[andy10v]

Yes, I'm getting set up for remote mapping

PRJ I assume?

Is that done through vag com logs or dyno?

[andy10v]

ATD
Quite pleased with myself here, sometimes it's the small things..

Nice little upgrade. All add up to make the experience that much better.

I never missed it, until I got an A4 that had external temp and now I miss it in the S2.

On the long to do list

[newsh]

PRJ I assume?

Is that done through vag com logs or dyno?

Yes but not sure exactly how it's done yet

[newsh]

What temp sensor did you use in the end?

I bought a second hand one for a few quid, I put the part number from Jason's thread into ebay and one came up, 3 wires round the back of the clocks, ran a bit of red and black speaker wire down to the front of the car and Bob's yer mother's brother.

[newsh]

Took half a day though....

[newsh]

Got in the car today and the trip computer screen has done that weird delaminating thing, it's leaking down from the top

[andy10v]

********, sods law, fix one thing and another goes.

[Michael S2]

Clocks look great

Got in the car today and the trip computer screen has done that weird delaminating thing, it's leaking down from the top

Mines has done the same...at least I don't have to look at how bad my mpg is now

[newsh]

Was doing some tidying under the bonnet today, getting ready to do some logs. Had a random thought to pull the DV vac hose off the IM and have a suck on it, no vacuum! This is a genuine 710N from the dealer, only a few months old. No wonder the car wasn't feeling right. Didn't have another diverter so thought I'd try the Bailey dump valve I'd bought for the UR, plugged the MAF hose and plumbed it in. Car is now proper quick again and still some fine tuning to do.

The snake was eating it's own tail.

[andy10v]

Nice to get a simple fix. Annoying as you often assume recently fitted new parts are good and dont think to check them.

Was it a new Kayser one?

[andy10v]

Hows the car running with a dump valve?