80Q Competition 20VT inside¡¡

[Słonik]

Without exaggeration, no longer relies so much on the original pedantically .
As for a place in the trunk that does not stop everything, far from me.

[Rocco]

Opening mouth ........

do you like how to look the old S8 wheels in the audi 80 competition?

it is fine for me ¡¡ and will receive BIG BRAKES

[Rocco]

the original small competition suspensions... not enough for the new heart





the S2 front hubs+suspensions combo seems to be better ¡

[Rocco]

i dont like too much this brake part... not sure if it will be enough or not...and i will look if the S2 3B it is a easy bolt on replacement , and this brake dont use the problematic brake ball

[Rocco]

this is the best part of the car i think

i will clean all the engine bay after complete all the installation

nice engine specs inside ¡ hope to rev it one day to 8700rpm because it is possible¡

666 thanks to my Latvian friend Vadim ,"Sweeper" here



the engine must work without N75 valve....



and the BIG blow/off from Dhalback will sounds fantastic i hope



here we have the small IC



the upgraded oil cooler too



hope that works better than the oem competition brakes and suspensions



RS4 B7 brakes, 8 small pistons inside, thanks to our friend Bo ¡¡

[Rocco]

here the DSY 6 speed gearbox ,it was installed with the 034 Motorsport 01A 5 speed mounts not radical ,perfect fit



DSY gearbox can be installed perfectly with our original S2 3B front driveshafts



hope to can use for a long time the original competition front wishbones....
after all,i will have to buy some powerflex parts...



nice custom pipes for the Big IC



here we can see how i had to install the rear transmissions.....
RS2 rear diff + competition hub carriers + S2 3B rear hubs + competition rear driveshafts and competition rear bearings.....

i have here the S2 Avant rear driveshafts + hub carriers but we cant install them because i was thinking that the S2 Coupe has bigger/stronger driveshafts as the Avants...but NO . S2 Avants has bigger rear driveshafts and rear bearings
for the moment it should work,and for the future we will see with the S2 Avant complete combo (suspensions,hubs,driveshafts,bearings...)





a nice dhalback small exhaust sistem only for the wastegate ,it will ends in the rear side of the car,just before the rear wheel , how will it sounds??





and finally here my original Audi books for our S2 ,many many knowledge inside , nice info ¡





More news ASAP


-Tomas-

[andy10v]

Some good progress, tis going to be a monster when finished.

Regarding the master cylinder are you wanting to interchange vacuum and hydraulic assist?

[Rocco]

Some good progress, tis going to be a monster when finished.

Regarding the master cylinder are you wanting to interchange vacuum and hydraulic assist?

we will see the options... we can make them communicated??

we will try to see first how it brakes

[sjw185]

do you like how to look the old S8 wheels in the audi 80 competition?

it is fine for me ¡¡ and will receive BIG BRAKES




Like the wheels suit the sedan well, need to see it on the deck

cheers

Steve

[Big Lee M]

WOW that is superb,nice work there. This is going to be mental!!!!!!!!! Can't wait to see this finished. I this you need bigger rear brakes too?

[Rocco]

WOW that is superb,nice work there. This is going to be mental!!!!!!!!! Can't wait to see this finished. I this you need bigger rear brakes too?

i would like to install in it my spare set of white dials from S2 3B,aux gauges too,and the RS2 airbag 3 spoke steering wheel , fully powerflexed, and for finish it.......a repaint??

it is in "bad" shape caused for some idiots in the past...they were playing with keys in the competition paint

rear brakes are now the original ones,but in the future...we will see,now i have not hurry/money for them , i am not rich¡

[newsh]

Big progress Rocco, nice

[s2_bo]

Hey Rocco! Looks great! This will be a monster when its done.

The brakes look good, glad your putting them to proper use..
Looking froward to more pics..

[Rocco]

Hey Rocco! Looks great! This will be a monster when its done.

The brakes look good, glad your putting them to proper use..
Looking froward to more pics..

are you talking about big brakes and pictures???

take a look to the NEW MEMBERS

Audi PCCB brakes : 400x38 & 350x34 & Audi Ceramic calipers + ceramic pads

all comes with a Expo /Demo car with no more than 1500kms

it was a complete bargain¡¡ ,the seller did not know what he was selling

as you can see...these parts dont weights "nothing" ¡¡ hope to see a driving diference with driving agility, brake perfonmance,acceleration and susspension confort

I will weight the oem brake combo of our cars ASAP....and we will see

the Audi Ceramic caliper weights 8.2Kg with perfect pads and oem caliper carrier....

the 350x34 discs came from the rear brakes of the demo car,and it is a waste of time to use them with Audi Ceramic calipers...it needs smaller calipers...just like the Porsche GT2/GT3 ones.

these rear discs would be perfect as a front brakes under 18" wheels

[Greg_S]

Excellent progress Rocco, just managed to get on forum for 1st time in over a week and catching up on peoples projects