UrS6 Saloon restoration

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • s0_big
    S2Forum Maniac
    • Dec 2009
    • 685
    • Country: Sweden

    #256
    Good looking

    Comment

    • Wrath
      S2Forum Maniac
      • Jan 2011
      • 779
      • Country: Sweden

      #257
      A little update on my car, new injectors (Siemens 670cc @ 3 bar) new fuel pump (Walbro 450) and a remap did the trick for a fun summer. My tuner did a good job to lift the tourqe bit higher in the Rev range so I still can use my stock bottom and stock clutch

      cant really say what power I have but 1,8 boost to the redline and 65% duty cycle should be like in the 400 area. Can’t really say what the injector flows in 4 bars but more than 670.
      You do not have permission to view this gallery.
      This gallery has 4 photos.
      Last edited by Wrath; 31 August 2019, 20:38.
      1995 Audi S6 - AAN (~350hp)
      2008 BMW 530xd (235hp)
      2008 Hyundai i30 - 1.6 CRDI (89hp)
      2011 KTM 990 SMR - custom tuned (120whp)

      Comment

      • LSG
        S2Forum Maniac
        • May 2010
        • 897
        • Country: United Kingdom

        #258
        Are they the rims off Peter ? They look really good with a lick off paint. You must be chuffed with them

        Comment

        • s0_big
          S2Forum Maniac
          • Dec 2009
          • 685
          • Country: Sweden

          #259
          That is for sure pure pornografi

          Comment

          • Vorsprung durch Technik
            S2Forum Freak
            • Jun 2007
            • 4754
            • Country: United Kingdom

            #260
            Hurry up and get the D2 alloys on with pics!
            96 URS6 plus speck saloon
            96 URS6 plus speck estate
            94 2.6 80 Avant
            99 2.8 final edition Cabriolet

            Comment

            • Wrath
              S2Forum Maniac
              • Jan 2011
              • 779
              • Country: Sweden

              #261
              Originally posted by LSG
              Are they the rims off Peter ? They look really good with a lick off paint. You must be chuffed with them
              Sure is, had them over for alignment and tigwelding new edges, latched and off to the blast guy, Olivine-blasted and then primed and painted with Z17, a couple of turn with some clear coat and that’s the result. (Both side except the hubface?) Cheramic coating after 30 days of curing
              Last edited by Wrath; 31 August 2019, 20:41.
              1995 Audi S6 - AAN (~350hp)
              2008 BMW 530xd (235hp)
              2008 Hyundai i30 - 1.6 CRDI (89hp)
              2011 KTM 990 SMR - custom tuned (120whp)

              Comment

              Working...