Catch Tank
Finally got around to fitting K24R's LHD catch tank:
In progress:
Hose for upper crank case ventilation to cyclone tank. To fit the cyclone I took of 60mm of the supplied hose from K24R that goes onto the lower crank case outlet. As you can see in picture below compared to above the cyclone sits a bit lower.
I routed the hose from the tank vent valve directly to the IM:
Inlet for catch tank from cyclone:
Outlet from catch tank to inlet in valve cover that goes to maf hose:
Final setup:
Finally got around to fitting K24R's LHD catch tank:
In progress:
Hose for upper crank case ventilation to cyclone tank. To fit the cyclone I took of 60mm of the supplied hose from K24R that goes onto the lower crank case outlet. As you can see in picture below compared to above the cyclone sits a bit lower.
I routed the hose from the tank vent valve directly to the IM:
Inlet for catch tank from cyclone:
Outlet from catch tank to inlet in valve cover that goes to maf hose:
Final setup:
Comment