Announcement

Collapse
No announcement yet.

Sleeper S2 Avant +400HP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    That would apply to stock as well since the hoses are placed roughly the same.

    Anyways I'm not concerned about this.
    Sleeper S2 Avant +450

    A6 Avant 2.7t Stage 3

    Audi S2 Coupe RS2'ed

    Comment


    • #77
      Originally posted by Jonas_R View Post
      Yeah should be lowered 30/30 but not sure that actually is the case.
      Hi!
      How about now? She lowered anything?

      Thanls mate!
      photobucket SUCKS
      sigpic

      Comment


      • #78
        I think I have found my problem.

        Looking at the thread it seems that the bilstein sport damper has the spring perch sitting to high. This would explain why my car does not seem to be lowered.
        Sleeper S2 Avant +450

        A6 Avant 2.7t Stage 3

        Audi S2 Coupe RS2'ed

        Comment


        • #79
          Rear damper, true?
          Maybe...
          photobucket SUCKS
          sigpic

          Comment


          • #80
            Yes rear shocks seems to be the problem.
            Sleeper S2 Avant +450

            A6 Avant 2.7t Stage 3

            Audi S2 Coupe RS2'ed

            Comment


            • #81
              Updates:

              So I got the car running again after installing my DW300 pump, however the old tank lid was completely broken where the fuel feed line connects:


              So got a new tank lid install with banjo bolt+seals (previous owner forgot the seals) and also gave the banjo bolt some brake grease to avoid it corroding again.


              I have also planed to install water injection on the car and I have this headlight washer bottle that was used on early 80 avant and coupe when they had headlight washers installed.



              However on late S2 Avant they changed the hydraulic bottle so it taller and therefore the headlight washer bottle wont fit.

              New hydraulic:


              Old hydraulic:


              So I bought the old style hydraulic bottle from ebay.co.uk and plan is then to install that so the headlight washer bottle will fit.



              Then I will have an OEM looking tank and it will sit high so I can mount the AEM feed pump below and then it should be good to go.
              Sleeper S2 Avant +450

              A6 Avant 2.7t Stage 3

              Audi S2 Coupe RS2'ed

              Comment


              • #82
                i use the aem 30-3300 kit,which one did you buy?
                audi coupe quattro b2 2.2 20vt project (573hp-626nm)
                TWINCHARGED power,zero lag
                AEM W/M injection

                Comment


                • #83
                  How much does that hydraulic bottle hold? I can't imagine it's more than a litre, so it's not going to last long.
                  sigpic
                  1991 Audi S2 3B - 2.5 Stroker engine
                  1997 A6 2.5TDi quattro avant - C4
                  1976 RD250E / 350LC cafe racer

                  Comment


                  • #84
                    He's changing to the smaller hydraulic reservoir so that the headlight washer bottle will fit [emoji6]

                    S2 Coupe 3B Project


                    Ur quattro restoration

                    S2 Avant

                    Boost is the new rock and roll!
                    sigpic

                    Comment


                    • #85
                      I feel like you'll be refilling that small washer fluid reservoir a lot if you're getting into boost often.

                      One of my friends has a cool set up in the trunk cubby of his single turbo b5s4. He's run a line to the trunk and made a bracket to mount a washer fluid jug. When he runs out (can go through up to two 4L jugs per gas tank if he's beating on it), he just pops the trunk, unscrews the cap that he's tapped with a hose for the pump, and swaps the empty bottle for a new one. Takes about a minute and he's back at it again.
                      Find me on Instagram @pry4sno
                      2010 Golf Sportwagen TDI /// Wifey Mobile
                      1992 80q 20v /// Eventual AAN'd Winter Sled
                      1990 Cq /// Project: Because Racecar

                      Comment


                      • #86
                        Originally posted by newsh View Post
                        He's changing to the smaller hydraulic reservoir so that the headlight washer bottle will fit [emoji6]
                        Oh yeah, missed that! Even the headlight washer bottle does not look huge?
                        sigpic
                        1991 Audi S2 3B - 2.5 Stroker engine
                        1997 A6 2.5TDi quattro avant - C4
                        1976 RD250E / 350LC cafe racer

                        Comment


                        • #87
                          Originally posted by quattro-nick View Post
                          i use the aem 30-3300 kit,which one did you buy?
                          Mine is a combi of AEM and aquamist.

                          I got the 30-3012 kit from AEM and then I'm planning to use the hfs3 controller.
                          Sleeper S2 Avant +450

                          A6 Avant 2.7t Stage 3

                          Audi S2 Coupe RS2'ed

                          Comment


                          • #88
                            Originally posted by AndyP View Post
                            Oh yeah, missed that! Even the headlight washer bottle does not look huge?
                            I will try and fill it up later today, but I would imagine 3-4l.

                            That should be sufficient to my use, plan is just to use it for extra cooling at first at least.
                            Sleeper S2 Avant +450

                            A6 Avant 2.7t Stage 3

                            Audi S2 Coupe RS2'ed

                            Comment


                            • #89
                              So just filled it up and it will take 4l so that is not to bad to be honest.
                              Sleeper S2 Avant +450

                              A6 Avant 2.7t Stage 3

                              Audi S2 Coupe RS2'ed

                              Comment


                              • #90
                                Suspension and rear brake refurb

                                So got some time today to do the rear brakes, old ones where complety broken and was not working at all.

                                So new brembo disc and pads + FTE/trw calipers all from carondo.de

                                Some install pics:

                                Old calipers:



                                Calipers, pads and disc all ready for bleeding:



                                Also managed to fix my bilstein shocks. I read in this thread about a height difference of 20mm between the bilstein shock and oem for S4 B5. Funny thing is that the same shocks that bilstein list for the rear for the S2 avant are also listet for the S4 B5.

                                This is the shot with the rear bilstein 24-062145 B8 for S2 avant:
                                Before - Height from floor to top of arc = 66cm:


                                After - Height from floor to top of arc = 64cm:


                                In the machine making the groove. The depth of the groove is 0,6mm and the width is 1,7mm.


                                With an extra groove 20mm below:


                                Comparison before and after:
                                Last edited by Jonas_R; 5th October 2016, 11:30.
                                Sleeper S2 Avant +450

                                A6 Avant 2.7t Stage 3

                                Audi S2 Coupe RS2'ed

                                Comment

                                Working...
                                X