Sleeper S2 Avant +400HP

[macspring]

so will give you feedback when I can drive the car.

Thanks.

[M_GORDON]

Water/alcohol mix

But to throw into the motor? with a high pressure pump, true?
Leave OEm pump and... do a new pump fix on?

Thanks man

[Jonas_R]

The new water bottle will just have a fitting with a hose to a 200 psi high pressure pump.

The whole system will be controlled by a aquamist hfs3 system

[M_GORDON]

The new water bottle will just have a fitting with a hose to a 200 psi high pressure put.

The whole system will be controlled by a aquamist hfs3 system

PS. Thanks for the Info

[Jonas_R]

I will fabricate a bracket for the high output pump and the fast acting valve that fits in the left wing.

[Jonas_R]

Door contact

So inspired by this for sale thread from LHD_Kid.


I went on a google hunt for a LHD door trigger with surround.
Left side Part no.: 893837019A
Right side Part no.: 893837020A

Found a set on eBay.de under audi 100 türgriff innen

The button with the lock key is from an A3 and the part no. is:
8L0962107A
Seems that many german dealers sell them with the harness attached at around 10 euro+shipping.

Yeah and car past MOT today, so I have two more years.

[A80Avant]

And I copied this as well. Just bought the parts. Are the connections and splits to make just behind the drivers door?

Would you mind sharing some photos what what to connect to what so I can do it as well?

[Jonas_R]

You splice in at the pump it is fairly easy did it on my old coupe. If you look in my coupe thread I think I might have written it there. Will look later today.

But yes I will take pictures and do I write up.

[A80Avant]

Thanks Jonas!! That would be brilliant!

[Jonas_R]

Hi Jonas,

I accept that the previous condition of the hydraulic fluid may not have been 'perfect' , but notwithstanding that did you notice any change in the operation of the brakes with the bo*b?

Just curious, as I may or may not need to replace mine.

I presume reconditioning one is not a viable option ?

Thanks.

I envy your progress.

So I think the brakes are more firm now, before it had a bit of a spongy feeling. However sometimes I still get this weird sound just before I stop completely, sound like the abs engaging just at the last minute, has only happened once though since I changed the bomb.

After reading this thread, I think it is properly the ABS sensors that needs adjusting.

[Jonas_R]

Engine rebuild

So I have decided to do an engine rebuild before I mount the turbo etc, so I had some parts coming in this week




Yeah and a new DV from Forge.

[s2dk]

dv

what size dv is that? a 25mm?

[Jonas_R]

Engine out job

So started to pull the engine out today.

Good it took for ever, there where so many bolts that either snapped or had to be cut.

So pictures of the work in progress:



Turbo is off


Intake manifold comes off


The pile is growing:


Engines is coming out


Free and hanging


Lots of room to work in the engine bay

[Jonas_R]

Cracks in head

So had a look at the head today after the engine was out.

Some not so nice cracks, or what do people say?





This does not seem to bad:

[PRY4SNO]

Remove the spark plugs and if the cracks go past three threads, it's out of spec (if my memory serves correct).