My sleeper

[hammer]

Ok Thanks

[hammer]

Electric steering is from a Opel corsa c

And i installed the steering column from my s2. The older electric steering from Opel are smaller then the one i have

[V6quattro]

V6quattro have you installed a Poti like this

Yes i have used that. Some information how i did it:

http://www.s2forum.com/forum/showthread.php?t=69047

Did you already drive it?

[hammer]

No i have "some" work to do. 4"downpipe, fuelrail and Pumps....

[hammer]

Upgrade for my ex housing from 3" up to 4" [emoji41], for 4" downpipe

[macspring]

Orginal the i5 have an imbalance on the Vibration damper and on the flywheel the same to make them Run harmonic. Many people install a Fidanzer flywheel wich have no imbalance and the ran without a Problem, so i think it should not be a Problem. But I will see.




Learning by doing[emoji4]

Agreed - Interested to see what happens in a good way.

Nice standard of work on your lathe and turbo.

Way beyond me.

Looking forward to your further progress.

[hammer]

4" downpipe

[Audi_CQ]

Have to admit that your's bigger then mine

[hammer]

[emoji57]

[hammer]

Wastgates to 90% ready

[Greg_S]

Thats tight on the pipe work for both wastegates!!

[hammer]

Yes, i also have to change the water rail for the turbo

[frankies20v]

As the late Roy castle said Dedication, dedication, dedication, that’s what you need,

[Horsty]

sorry, aber du musst unbedingt die spezifische unwucht an schwungrad und riemenscheibe anbringen, sonst bekommste riesen probleme mit den massenkräften 2. ordnung!!

[hammer]

Danke. Schon probiert ohne?