Announcement
Collapse
No announcement yet.
Small Urs6 project!
Collapse
X
-
I was bored last week and I wanted to cover the wire connections. Original plastic one is almost impossible to find. I also wanted to paint the read strud bar black. So, some thinking and here it is.
It was very easy job and cheap too, max 10 euros.
Sorry because of bad picture quality, it is taken with mobile phone
Leave a comment:
-
Received rotors today. 360mm, big and heavy. They are not connected jet, just wanted to see how they look. I have seen lot of pictures, I knew that they are big but they are super big. Already want to feel how they brake
Attached Files
Leave a comment:
-
New front brakes are coming one day
Brembo 18 z
I think I don't paint those, I will try to lacque. We'll see how they come out.
They are not finished jet.
Leave a comment:
-
All new original lower door trims. Hope they will last some years.
Attached Files
Leave a comment:
-
Home made and designed oil catch can.
Here it is not finished jet but you can see.
The air goes in, on the picture left.
Here you can see inside, on air out coming hole.
Here you can see inside, the bottom hole.
Leave a comment:
-
Found some a little older pictures. Bosch 044 installation.
Leave a comment:
-
upgrade. I changed my coil hardness. Last owners made hardness does not look reliable
New ones! I bought those from user Norbitron. Top quality.
And the old ones
New ones left has 3 pin old 2.
Last edited by maiks; 24 September 2015, 18:14.
Leave a comment:
Leave a comment: