I did not know that there is plastic and I accidentally cut it half. Luckily I found OEM new one. Bolt is temporary.
Announcement
Collapse
No announcement yet.
Small Urs6 project!
Collapse
X
-
Leave a comment:
-
Originally posted by Majorcina View PostNice job
I am also very pleased with the results. It is very dirty job but when it's all done then there is no rust any more. But it is a long way to go. Next month I'll remove gas tank and rear axle. All new Albert's bushings are coming tomorrow.
Leave a comment:
-
What I use.
First coat
This work would be much easier if the car was higher. But no worries, it can be done.
Leave a comment:
-
Leave a comment:
-
In the beginning I planned to but bigger muffler but at the end I decided to but this one. Muffler length 60 cm 3'' in and out
Attached Files
Leave a comment:
-
I went to the shop to buy more paint but the seller suggested different paint. It was also two times cheaper. I don't know whats good or bad.
I will see after few years. I will post photo with new paint bottle later
Here is bottom now.
Attached Files
Leave a comment:
-
You save at least 10 kg when you can to it with one muffler
Extra weight is very bad and mufflers what run straight through do not keep noise down. I don't know what mufflers those are but I am just saying.
I want to make something what lets hp through but noise not Probably impossible But will see.
Leave a comment:
-
Originally posted by UrS4boy View PostMight be too late but have you seen UrS4guy's (Hap M's) Green Monstah exhaust system?
REFERENCE: http://www.s2forum.com/forum/showthr...hlight=exhaust
Leave a comment:
-
It gets more difficult every day to get original parts. They don't make those anymore
Leave a comment:
-
In my country i cant get even parts for big service,if that make your life any easyer hehe
Leave a comment:
Leave a comment: