Trip computer display

[ManiacuV6]

I will try to check a display to get the pinout in the next days!

[AndyP]

I will try to check a display to get the pinout in the next days!

Thanks

[AndyP]

I will try to check a display to get the pinout in the next days!

Did you manage to find anything?

[ManiacuV6]

I need to make am electronic circuit so i can test the screen without distroying it ! So it will take some days more. I need to find the schematic .

[4WDrifter]

This might be of interest to someone. For 70quid you could swap the working trip computer section for your non-working section.

http://www.carandclassic.co.uk/car/C236438#

[Nuvo]

Erm, the trip comp LCD is bleeding, so what would be the point?

[4WDrifter]

Sorry I hadn't noticed that.I thought I was being helpful.

[Horsty]

here is a very interested person.

i'm running a MGP/MPH cluster with a bleeding trip computer in my 7A coupé.
that looks pretty crappy... i'll look for wiring diagrams today, if they are sstill needed.

cheers

[AndyP]

Can anybody help with a pin out so the prototype can be tested?

[Val]

Didn't follow this topic from the beginning.
Sorry, if this isn't what you want.

[AndyP]

Didn't follow this topic from the beginning.
Sorry, if this isn't what you want.

If you look at the pic in post 32, the LCD screen is attached to the circuit board with these 'zebra stripe' ribbon type connectors, they are looking for a layout for thse so they can put power to the prototype screen and test it.

[Nuvo]

Oops.

[Horsty]

any news?

[AndyP]

Can anybody help with a pin out so the prototype can be tested?

Yearly bump!

[ManiacuV6]

I worked for that pinout hence I cannot give it for free.
Or else I'll find a producer for Lcd display and make a batch .