Coil Packs Misfire

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Greg_S
    Administrator
    • Jul 2003
    • 12430
    • Country: United Kingdom

    #76
    10 designed for our engine, got the bulk discount from euro car parts.
    Greg

    S2Forum.com Administrator & Webmaster

    '93 Coupe with a few tweeks

    Comment

    • S2sedan
      S2Forum Enthusiast
      • Aug 2004
      • 189

      #77
      how much did you pay for those ???
      S2 Limo sold !!!
      M5 E34 with some mods in the garage
      sorry, but much happeir now !

      Comment

      • Greg_S
        Administrator
        • Jul 2003
        • 12430
        • Country: United Kingdom

        #78
        £630 inc vat and delivery
        Greg

        S2Forum.com Administrator & Webmaster

        '93 Coupe with a few tweeks

        Comment

        • S2sedan
          S2Forum Enthusiast
          • Aug 2004
          • 189

          #79
          so 63 pounds each ????
          S2 Limo sold !!!
          M5 E34 with some mods in the garage
          sorry, but much happeir now !

          Comment

          • Greg_S
            Administrator
            • Jul 2003
            • 12430
            • Country: United Kingdom

            #80
            Yeah there abouts, I was quoted 67.85+vat and P&P on 5 before.

            Greg
            Greg

            S2Forum.com Administrator & Webmaster

            '93 Coupe with a few tweeks

            Comment

            • Greg_S
              Administrator
              • Jul 2003
              • 12430
              • Country: United Kingdom

              #81
              Been trying to wire up my coil packs today and tired them in the car but I must have a wire in the wrong place and its a nightmare trying to find the problem. Can anyone provide a definitive set of pinouts for the connectors etc? need to get the car back on the road tommorow,

              ta
              Greg

              S2Forum.com Administrator & Webmaster

              '93 Coupe with a few tweeks

              Comment

              • Doug_RS2
                S2Forum Possessed
                • Jul 2003
                • 3847
                • Home: Scotland Current: England

                #82
                I emailed some info to you Greg - It was too big to post here - i have 3 email addresses for you so I hope one gets to you.
                S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8

                Comment

                • Greg_S
                  Administrator
                  • Jul 2003
                  • 12430
                  • Country: United Kingdom

                  #83
                  Cheers doug, I appreciate it
                  Greg

                  S2Forum.com Administrator & Webmaster

                  '93 Coupe with a few tweeks

                  Comment

                  • Greg_S
                    Administrator
                    • Jul 2003
                    • 12430
                    • Country: United Kingdom

                    #84
                    Ive had a look at the diagrams last night. It doesnt quite solve my problem though since I dont know which cylinder is no 5 or no 1. Ive got the link to the SJM autotechnik site which shows the pinouts of the POS to the coils on the page here, ive checked those and they look fine. its the white connectors onto the bulkhead I need to check now.

                    What I need to work out is if the pin outs on the white connectors are in the same order as those on the POS?

                    Greg

                    S2Forum.com Administrator & Webmaster

                    '93 Coupe with a few tweeks

                    Comment

                    • kwlw
                      S2Forum Extremist
                      • Sep 2004
                      • 1025
                      • Country: Lithuania

                      #85
                      Originally posted by Greg_S
                      Ive had a look at the diagrams last night. It doesnt quite solve my problem though since I dont know which cylinder is no 5 or no 1. Ive got the link to the SJM autotechnik site which shows the pinouts of the POS to the coils on the page here, ive checked those and they look fine. its the white connectors onto the bulkhead I need to check now.

                      What I need to work out is if the pin outs on the white connectors are in the same order as those on the POS?

                      http://www.sjmautotechnik.com/troubl...4_Ignition.htm
                      White connectors of the coils, are constant +12v as far I remember. Also at least on aan, there are cylinder numbers on the injectors. All connectors have numbers, and the pin missing on the apropriate connectors.

                      Hope this helps.

                      Sau
                      200 20vt 88' 3b, human carrier
                      CQ typ85 with AAN inside, see project blog at http://kwlw.blogspot.com

                      Comment

                      • Greg_S
                        Administrator
                        • Jul 2003
                        • 12430
                        • Country: United Kingdom

                        #86
                        Ive had another read thru the wiring diagrams doug sent me and the sjm site and I think ive got it worked out. It looks like all 5 connections to the white connector go back to a 20Amp fuse. I'll take a look on the injectors.

                        @Kwlw does the picture on the SJM site match up with the right cylinder no for the corresponding coil?

                        I will have another go at checking my wiring this evening and hopefully will have the car up and running again.
                        Greg

                        S2Forum.com Administrator & Webmaster

                        '93 Coupe with a few tweeks

                        Comment

                        • kwlw
                          S2Forum Extremist
                          • Sep 2004
                          • 1025
                          • Country: Lithuania

                          #87
                          Originally posted by Greg_S
                          Ive had another read thru the wiring diagrams doug sent me and the sjm site and I think ive got it worked out. It looks like all 5 connections to the white connector go back to a 20Amp fuse. I'll take a look on the injectors.

                          @Kwlw does the picture on the SJM site match up with the right cylinder no for the corresponding coil?

                          I will have another go at checking my wiring this evening and hopefully will have the car up and running again.
                          I will post it in three posts. IMHO it is the clearest way I can describe .

                          1. Coil numbering according to VAG
                          2. End stages numbering according to VAG
                          3. Electrical schematics
                          200 20vt 88' 3b, human carrier
                          CQ typ85 with AAN inside, see project blog at http://kwlw.blogspot.com

                          Comment

                          • kwlw
                            S2Forum Extremist
                            • Sep 2004
                            • 1025
                            • Country: Lithuania

                            #88
                            Coils

                            Picture of coils
                            Attached Files
                            200 20vt 88' 3b, human carrier
                            CQ typ85 with AAN inside, see project blog at http://kwlw.blogspot.com

                            Comment

                            • kwlw
                              S2Forum Extremist
                              • Sep 2004
                              • 1025
                              • Country: Lithuania

                              #89
                              Picture of end stages

                              Picture of end stages
                              Attached Files
                              200 20vt 88' 3b, human carrier
                              CQ typ85 with AAN inside, see project blog at http://kwlw.blogspot.com

                              Comment

                              • kwlw
                                S2Forum Extremist
                                • Sep 2004
                                • 1025
                                • Country: Lithuania

                                #90
                                Ignition schema

                                Electrical schematics of the pictures above
                                Attached Files
                                200 20vt 88' 3b, human carrier
                                CQ typ85 with AAN inside, see project blog at http://kwlw.blogspot.com

                                Comment

                                Working...