Coupe Rear ARB options aka FARB on the rear of a coupe

[Error404]

really?

They're not in there from factory are they?

[stiglet]

AFAIK all the wishbones have the hole for these droplinks, just not the bushes? So you could use your original wishbones.

Those look similiar to the ones i have, just not sure if they are kinked. I'll have a root around in my "storage yard" and see if i can dig them up.

[Rusty]

Mine were Febi ones from QC and came with teh bushes pressed in if I'm not mistaken. I was a little confused as I'd not seen that style ARB.

[stiglet]

They were probably meant for an early 10v. Wishbones are the same otherwise i think.

[Error404]

Cool. Thanks Al.

They need to be the kinked ons as they need to clear the driveshaft, and also if you look at Dougs pics from the link on the first page, the ARB is offset from the wishbone

[stiglet]

Righto, i'll have a look after work tonight if i can.

[Error404]

Fantastico

[stiglet]

Got the drop links, got the roll bar and bushes (probably knackered but hey...) but i can't find the mounts for the roll bar to the subframe nor can i find the other wishbone with the bushes in (also probabbly knackered anyway). If you need these i'll have another look when it's light.

Just to confirm, drop links are very kinky

[Error404]

Sweet

Might i borrow them for testing mate?

[stiglet]

Sure sure. Which bits you wanting? Roll bar prolly bit big for your letter box!

[Error404]

drop links plese mate

Got a suitable ARB and subframe mounts

[Audi_CQ]

Yes, not sure if it's the exact same parts but that is the idea. In this setup the levers are approx 2/3 the length so the 22mm arb becomes about as stiff as the 25mm jobbie I've got.

But also only 2/3 the travel so only as stiff as a 22mm

[stiglet]

Righto. I'll drop those in the post next week.

[anton]

bad news on the second wishbone i'm afraid Al(s) i seem to remember that was the one we set fire to and put the delrin bushes in...i think you'll find one wishbone with a bush and three without.....i think neway...you may be lucky....

Ant

[stiglet]

But also only 2/3 the travel so only as stiff as a 22mm

Eh?